If you want you can come around and view my one
hi guys can anyone tell me where i can get some pics of a chassis & dimentions for the 109 & 109 1ton..i am just about to weld the front outriggers on i have measured before i cot old ones off..i have the car on stands & undid all the front of the front springs & shocks dropped them out of the way ,then measured from the top of each outrigger or dumb iron what ever you want to call them to the ground concrete floor,now i have put the passenger side on just sittin there & measured it to the same as what the one was before i cut it off..but when sitting on there ,there is a tab on the inside of it that sits on the front crossmember if i put this square on the crossmember its to high at the front..just want to check before i weld them in the morning..any help would be great or diagrams would be even better..thanx jason..
If you want you can come around and view my one
thanx dobbo i am on my way to work thats why i was hoping someone could put me onto some pics with dimentions tonite.but if not i mite contact you to have a look at it on the weekend if that suits you & i dont have to work.i gettin sick of this workin for a living.
Dimensions are in the (genuine) manual. there were some pdf versions floating around???
Hope this works/helps
it's just too good to scrap, and I wouldn't want to sell it if that were the case. Must go to a good home only.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks