Thread: Inductive module

Originally Posted by FredQld

I replaced inductive module on my 1993 RR recently. Replacment was non-genuine (Ford). Please see my other recent thread http://www.aulro.com/afvb/showthread.php't=36111 Has anybody had any experience with non-genuine modules?

What do you actually mean by "inductive module"??????

The amplifier module on the side of dizzy or next to coil......

OR

The magnetic pick-up coil adjacent to rotating reluctor inside the dizzy ??????

If you mean the module near the coil, this is made by Bosch and used in a lot of commonly found vehicles including Fords and Holdens. (I have a list of all the vehicles its used in if someone wants a cheap spare from the wreckers - I paid $25 for the last one). So 'non genuine' is fine.

I believe other term is ignition module. The original sits next to dizzy but aftermarket is adjacent to coil (wires extended on dizzy).

Originally Posted by mark2

If you mean the module near the coil, this is made by Bosch and used in a lot of commonly found vehicles including Fords and Holdens. (I have a list of all the vehicles its used in if someone wants a cheap spare from the wreckers - I paid $25 for the last one). So 'non genuine' is fine.

List please

Originally Posted by FredQld

I believe other term is ignition module. The original sits next to dizzy but aftermarket is adjacent to coil (wires extended on dizzy).

I believe they are different types (dissy mounted vs coil mounted)and probably not interchangeable. Remote mount is generally better as away from the heat......

Originally Posted by BigJon

List please

PM me with your email and I will send you the PDF catalogue. If you can post it up here, please do.