As I said ^ ^ ^. Confused?
Printable View
As I said ^ ^ ^. Confused?
Bit confused I think...Diesels have one at the bottom of the timing case.....
and we should all use the one for the bell housing, I have the two installed and just remove them at service time to check whats been dripping if any..
I'll scan the pages from my user manual and post them here if ya like. I have a 1997 Disco V8i Auto and the manual only mentions wading plugs for the 300TDi engine vehicles.
This is what the RAVE manual has to say (in the owner's manual section).
Above this text is a diagram of a bellhousing with "Flywheel housing - V8i" written under it.Quote:
Originally Posted by RAVE
I checked my owners manual and what you say is correct. If I have a spot for one or there is one there then it must be a master of camouflage cause I can't find it.Quote:
Originally Posted by Utemad
Will have a crawl under neath again on the week end ans satisfy my curiousity
I agree. I can't find mine either. Must be hidden beneath all the oil :DQuote:
Originally Posted by Rovernaut
Mines degreased and clean and I never saw it. as i said will probe/mooch/investigate/ this weekend. might even take a pic and post it if i find it.Quote:
Originally Posted by Utemad
* I had a good look today, for those that can't find theirs, I don't think they stand out like dogs balls, I crawled around and noticed on the bottom corners of the bell housing are 2 plugs with allen key like holes on their face. There are other fastening nuts and bolts along the bottom of the bellhousing,but these plugs are in the corners. It suprised me, as I thought it would be on the extreme most bottom possibly in the centre.
Did Sir remove one, perchance?
No didn't have time, one was showing some thread so definitely a Plug I believe.Quote:
Originally Posted by 4bee