What brand/part no is this socket

**SSmith** · 11th June 2007, 12:01 AM

if the car came from singleton part is most likely mining indystry or ex-mil sourced (bout the only 2 things in that place

)

**njz** · 12th June 2007, 11:31 AM

It looks like a weatherproof hella connector:

2 pole plug and socket
http://db.hella.com.au/cgi-bin/catal...ew&flmaint=950

mounting base
http://db.hella.com.au/cgi-bin/catal...ew&flmaint=954

**p38arover** · 12th June 2007, 02:22 PM

By gum! I think you're right!

I'll go down to Bursons and check.

Thanks you.

Ron

**Utemad** · 12th June 2007, 05:06 PM

Originally Posted by njz

It looks like a weatherproof hella connector:

2 pole plug and socket
http://db.hella.com.au/cgi-bin/catal...ew&flmaint=950

mounting base
http://db.hella.com.au/cgi-bin/catal...ew&flmaint=954

That was what my fridge had Ron. Except mine looked like an older design like your picture.

**tab** · 18th February 2008, 03:20 PM

http://www.connectortech.com.au/data.../ecomate_e.pdf

try these,
Looks like a mil spec connector - more quality than required,
Unless you can procure one 'surplus to requirements' it might be easier to change to something more common like a cigarette lighter socket, or an xlr type socket available at ubiqutous dick or jaycar or altronics, heres one Altronics - Your One Stop Electronics Shop

**Dougal** · 18th February 2008, 04:58 PM

It is a standard type industrial connector. I can't remember the DIN number, but Binder make them.
I've used them before with FESTO servo-pneumatic gear.

**Utemad** · 18th February 2008, 05:04 PM

Originally Posted by tab

it might be easier to change to something more common like a cigarette lighter socket, or an xlr type socket available at ubiqutous dick or jaycar or altronics

I'm pretty sure he would have by now

Thread: What brand/part no is this socket

Thread Tools

Bookmarks

Bookmarks

Posting Permissions