Results 1 to 5 of 5

Thread: Disco 96 V8 - noisy Low Range

  1. #1
    Join Date
    Nov 2006
    Location
    Perth, WA
    Posts
    40
    Total Downloaded
    0

    Disco 96 V8 - noisy Low Range

    Hi all
    Can anyone tell me if their Disco Low Range is noisier than their High Range when they lock their CDL ?? Mine is an auto V8 with low kms - 122 000. It works fine in Low range with no loud clunks or anything - just the whirring sound of gears turning - is this normal ???
    Thanks for any help you can give.

  2. #2
    Join Date
    Jan 1970
    Location
    Douglas Park, NSW
    Posts
    9,347
    Total Downloaded
    0
    CDL shouldn't affect the noise level. It has no influence on the gears when used off road.

    There is a slight whine in my RR (same transfer case as your Disco) in low range, especially with a bit of speed up) but that's only because the low range gears are spinning faster. The teeth cut on low range might have some influence too.
    Scott

  3. #3
    Join Date
    Nov 2006
    Location
    Perth, WA
    Posts
    40
    Total Downloaded
    0
    Thanks Scouse, maybe that is all it is. Haven't done a lot of low range work in it yet so I might go out and give it a bit of a flogging and see if it gets worse or just stays the same.

  4. #4
    Join Date
    Jan 1970
    Location
    Melrose SA
    Posts
    2,838
    Total Downloaded
    0
    If you lock the CDL on a high traction surface and turn sharp so you wind the transmission up they will make more noise.
    I hope you are not doing this??

  5. #5
    Join Date
    Jan 1970
    Location
    Dalby
    Posts
    4,011
    Total Downloaded
    0
    My Disco low range is noisier than high range. Whether locked or unlocked.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!