Results 1 to 5 of 5

Thread: Noise from Transfer Case???

  1. #1
    Join Date
    Jul 2007
    Location
    SA
    Posts
    152
    Total Downloaded
    0

    Question Noise from Transfer Case???

    G'day all,

    Some of you might remember a previous thread where I asked about a noise from my Gearbox/Transfer Case well here I have a related question after taking it to a mechanic...

    Question: Took my V8i Discovery (1996) to a mechanical mob in SA and they said that a crunching noise from the Transfer Case when in neutral and the Gearbox is in gear is caused from normal where and is not a problem - IS THIS SO?

    Does every Discovery with 170,000kms or more on the clock have this noise?

    They also said that the whine I have in gear is from that main baring in the clutch and not related to the Transfer Case crunch noise - I'm still not convinced!!

    Cheers,

    Chosen.

  2. #2
    Join Date
    Jan 1970
    Location
    Golden Grove, Adelaide
    Posts
    287
    Total Downloaded
    0


    Why are you yelling






    TIC

    Transfer box in neutral and main box in gear can be noisey. The gears in the TC are relatively large and agricultural TIC. When they are unloaded, and spun up, the free play in the dear train can allow a hell of a lot of chatter (chaff cutter style).

    I dont know if this is the crunch you mention. crunch weird, but noisey yes. can be

  3. #3
    Join Date
    Jul 2007
    Location
    SA
    Posts
    152
    Total Downloaded
    0
    Thanks Duff, it may well be just typical Disco sound in the TC. I'll take it to a Land Rover specialist next - The whine isn't a typical Land Rover sound!

    chosen

  4. #4
    Join Date
    Jan 1970
    Location
    Launceston, TAS
    Posts
    853
    Total Downloaded
    0
    Not related to a Forest this dealership??????

    Look up lyns Landrovers at Parafield (although last time I spoke to him he was looking at moving everything home.. I think he has a website)

  5. #5
    Join Date
    Jul 2007
    Location
    SA
    Posts
    152
    Total Downloaded
    0
    Okie Doke, Today I adjusted the Bearing Preload in the TC, it has taken up the slack in the Case. The noise is still there, may be just warn gears but I suspect it is the bearings. I'll drive it around until/if it starts getting noisier and then pull the whole thing out and do the blasted bearings then...

    Cheers all

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!