-
27th July 2007, 12:46 PM
#1
replacing stereo speakers in base model 99 Td5 Disco
Hi - this is a bit more of a hassle than in S1 Discos! I've undone all the screws holding the door panels together, but it looks like you then have to prise the panel open, which I started doing, but became a bit alarmed at how much pressure was required with little result. Any tips? Do these panels actually come away without breaking once you've removed the screws?
Thanks and TFIF
-
27th July 2007, 01:20 PM
#2
They do need quite a bit of pressure, I used a large plastic fork my wifes uses in the kitchen for stuff
I pulled back on the panel as much as I could so I could see where the clips were then slid in this two pronged fork (one prong either side of the clip) and gently levered the panel off - repeating for each clip.
I did post a pic of 'the fork' but I think it;s long gone
-
27th July 2007, 01:23 PM
#3
Last edited by ladas; 22nd October 2008 at 09:47 PM.
-
27th July 2007, 01:56 PM
#4
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks