Results 1 to 6 of 6

Thread: 300Tdi Thermostat Housing Elbow, Help needed

  1. 20th August 2007, 09:11 PM #1
    sclarke's Avatar
    sclarke
    sclarke is offline TopicToaster
    Join Date
    Jan 1970
    Location
    Warburton, Victoria
    Posts
    4,693
    Total Downloaded
    0

    300Tdi Thermostat Housing Elbow, Help needed

    Guys
    Need to know the following
    Who has a 300Tdi engine (disco or Defender) that on the Thermostat housing Elbow, That is the one that the hose connects to and the other end is to the Thermostat.
    Who has one of these elbows with switches in it?? They look like thermostats that are used for your temp gauge, but 2 wires....

    Anyone???
    Anyone???
    Bueller......
    Bueller......

    I'm after one and its parramount that i get one NOW.... no serious.. looking at getting one to make a Thermofan conversion for the Fender....

    Steve
    Reply With Quote Reply With Quote
  2. 20th August 2007, 09:24 PM #2
    Olfella
    Olfella is offline Fossicker
    Join Date
    Jan 1970
    Location
    Broken Hill NSW
    Posts
    16
    Total Downloaded
    0

    Thermostats at outlet housing 300tdi

    Have 95 disco with 2 on outlet. one starts elec fans when coolant temp hits 100 deg C the other cuts compressor clutch when temp over 100.
    Regards,
    Chris.
    Reply With Quote Reply With Quote
  3. 20th August 2007, 09:52 PM #3
    incisor's Avatar
    incisor
    incisor is offline SysAdmin (Owner) Vendor
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,689
    Total Downloaded
    32.38 MB
    as above

    the temp sensor is at the front of the head on the drivers side.
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
    Reply With Quote Reply With Quote
  4. 20th August 2007, 10:22 PM #4
    sclarke's Avatar
    sclarke
    sclarke is offline TopicToaster
    Join Date
    Jan 1970
    Location
    Warburton, Victoria
    Posts
    4,693
    Total Downloaded
    0
    Cool...

    Ok so that explains what i need

    I'll search the Wreckers for an elbow as i'm after one to setup my Thermo fan in place of the Normal fan.

    Steve
    Reply With Quote Reply With Quote
  5. 16th January 2008, 08:47 AM #5
    isuzu110's Avatar
    isuzu110
    isuzu110 is offline Master Supporter
    Join Date
    Jan 1970
    Location
    Camp Hill Queensland
    Posts
    775
    Total Downloaded
    0
    Clarkie

    Just a followup on this one...

    Did you ever do this ? How different was the Disco elbow from the Defender one ? Without taking it off, it looks like my elbow has the switch/sender spots already cast and I may only need to drill the blanking out.

    I want to mount a second water temp sender in parallel with the factory one. I've toyed with the idea of tapping the brass filler plug on to of the housing but I don't believe I will have much clearance to the bonnet.
    '95 110 300TDI, F&R ARB Lockers, Twine Shower, Aux Sill Tank, Snorkel, Cargo barrier, 9 seats, swingaway wheel carrier, MadMan EMS2
    '85 110 Isuzu NA 4BE1 3.6l Diesel, 0.996 LT-95, Rear Maxi (SOLD)
    '76 SIII 109" Nissan ED33 5-SP Nissan GBox (SOLD)
    Reply With Quote Reply With Quote
  6. 16th January 2008, 09:43 PM #6
    sclarke's Avatar
    sclarke
    sclarke is offline TopicToaster
    Join Date
    Jan 1970
    Location
    Warburton, Victoria
    Posts
    4,693
    Total Downloaded
    0
    Yeah, got a Disco one.... it has the 2 senders in it...
    Reply With Quote Reply With Quote
« D110 - Headlight upgrade | D110 - Lightbar »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!