Reply With QuoteFrom the lack of responses, perhaps a look on 4wdmonthly may be worth while. There seems to be a number of dodgy ones along with the decent, but worth a look anyhow.
I cant see it being that hard. Post up any ideas you end up with!
Has any one out there made a custom snorkel, I am considering having a crack at making one as I have easier access to the fabricating equipment than I do the $450+ to buy one. Photos and details would be good.
Master
From the lack of responses, perhaps a look on 4wdmonthly may be worth while. There seems to be a number of dodgy ones along with the decent, but worth a look anyhow.
I cant see it being that hard. Post up any ideas you end up with!
I made a snorkel for my 84 rangie out of 90mm down pipe and bends and a rectangle to round fitting cost a grand total as i had the pipe allready of 20 bucks
YarnMaster
my Rangie one is 3" exhaust pipe with a couple of 45 degree bends.
the old style Defenders ones were similar - the pipe used to come through the body where the wind top vents are in most applications.
HTH
LRH
Disco 4 SDV6 Auto
Disco 4 SDV8 Dual Cab Project
Disco 2 M57 Extra Cab Project
Foton Tunland Cummins ISF
Disco 1 3 door 4.6 V8 Auto
RRC V8 Auto "Classic" Softdash
RRC 300 TDI Auto
Disco 1 TD5 Auto Buggy
Disco 1 300 Tdi Auto Ute
SAME Explorer 70HP 4x4 Tractor plus Nell Loader
Subaru GDA WRX
Triumph Bonneville SE
Yamaha TTR250
ChatterBox
Seen some nice ones done with stainless steel exhaust pipe- you'd need access to a mandrel bender to make it look decent.
TopicToaster
you can get them for about $400
just bite the bullet and get one... a home made never looks as good on a Defender
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks