Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: 15" on Disco

  1. #1
    Join Date
    Jul 2007
    Posts
    368
    Total Downloaded
    0

    15" on Disco

    Will a 15" wheel fit on a Disco or will there be clarence problems with brakes etc?

  2. #2
    Join Date
    Jan 1970
    Location
    Yinnar South, Vic
    Posts
    9,943
    Total Downloaded
    0
    It will be AOK

  3. #3
    Join Date
    Apr 2007
    Location
    Central Coast NSW
    Posts
    1,103
    Total Downloaded
    0
    Hi. It's not so much the wheel diametre but the tyre you're fitting. Obviously 40" Boggers on 15 inch rims aren't going to fit. I've been running 15x8 rims with 31x10.5x15 tyres for about 6 years. I have a '91 Disco with a 2 inch spring lift. Initially i found the rear of the rear wheel arch nicked the outside of the rear tyres on full articulation - so i trimmed the guard with a nibbler (attachement on a drill).

    I guess 15x7 with 31's wouldn't give any dramas but it depends if you've got a spring or body lift.

    I'm sure theres a spreadsheet of what wheel/tyre combos will fit with varying (no mods to flares) body mods.... i'll try find it.

  4. #4
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    14,147
    Total Downloaded
    99.87 MB
    I think the problem is more about the rim fitting over the brakes and shields rather than fitting large diameter tyres. Sometimes you cant fit smaller rims due to this. The advantage of 15" rims is cheap tyres.
    Cheers
    Slunnie


    ~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~

  5. #5
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,616
    Total Downloaded
    0
    I had 15" rims on both of my disco 1s - there are no problems with clearances on brakes or body with 235 width tyres - anything wider/higher though may be an issue though so a lift/trim would be needed.
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  6. #6
    Join Date
    Oct 2003
    Location
    Montrose, Vic.
    Posts
    5,417
    Total Downloaded
    0
    Quote Originally Posted by Randylandy View Post
    Will a 15" wheel fit on a Disco or will there be clarence problems with brakes etc?
    G'day Randylandy,

    What model Disco are we talking?.. As the guys have said you should have no drama with a Disco 1..... but I'm with Slunnie if it's a DII....I can't fit my finger between the caliper and inside of a 16" rim on mine... so no way a 15" would fit.

    Cheers. Mark
    Mark

    Of all the things I've lost, I miss my mind the most

    2015 TDV6 D4.... the latest project... Llams, Traxide, Icom 455, Tuffant Kimberleys and Mofos.... so far.
    2012 SDV6 SE D4 with some stuff... gone...
    2003 D2a TD5...gone...
    2000 D2 V8...gone...
    https://bymark.photography


  7. #7
    Join Date
    Jan 1970
    Location
    Yinnar South, Vic
    Posts
    9,943
    Total Downloaded
    0
    It's a series1, 300tdi

    Nobody is ever happy with a simple answer are they

  8. #8
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,616
    Total Downloaded
    0
    Quote Originally Posted by rovercare View Post
    It's a series1, 300tdi

    Nobody is ever happy with a simple answer are they
    You might know that - but no one else does - no model listed on the original post and no model in the profile.

    I must admit I had my blinkers on and automatically assumed a D1 but it could have a been a D1, D2 or even a D3 that the original post was referring too.

    I guess it shows we should list our cars in the signature blocks or list what model the thread/post specifically refers too.

    Cheers

    Garry
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  9. #9
    Join Date
    Jan 1970
    Location
    Bathurst NSW
    Posts
    14,445
    Total Downloaded
    0
    i have spare weeked tyres in the shed on 15's ad they work fine, no issues with clearance at all
    <a href=https://the4wdzone.com.au/wp-content/uploads/logo.png target=_blank>https://the4wdzone.com.au/wp-content/uploads/logo.png</a>
    The 4wd Zone/Opposite Lock Bathurst
    263 Stewart Street, Bathurst, NSW
    http://www.the4wdzone.com.au/
    Discounts for AULRO members, just shoot me a PM before you purchase.

  10. #10
    Join Date
    Jul 2007
    Posts
    368
    Total Downloaded
    0
    yes it is a S1 300 TDI have a new set of cooper 31" ST off my jeep that I dont want to go to waste plus would rather have steel rims. Any idear of what rims would be best to use ie sun raiser etc and where to get them from (bunbury WA)? will look into putting more details on my profile if i can work it out.

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!