G'Day All
Does anyone know if you can run 750x16 stealtrecks without tubes....in the process of changing them now so a quick answer would be good I know the army tube them but they look like tubeless
Thanks
You won't find me on: faceplant; Scipe; Infragam; LumpedIn; ShapCnat or Twitting. I'm just not that interesting.
NO... you cant if you could they would have the word TUBELESS written somewhere on them...
if you do run them without tubes they last between 5 and 8000km....
I found that out the hardway when I took my first set into a tyre shop and they fitted them without tubes.. When I blew all 4 inside of 1000km of each other after having them istalled just after a service and having all 4 fail before the next service in the same way I went and had words with said tyreshop who examined the carcases and wanted to know what happened to the tubes when I asked about what tubes I was enlightened to the lack of the word tubless on the carcass remnants (sidewalls were ok but there was gross delamination of the internal belting)
No obvious staking or excessive wear and no, you dont get to blame the batch as they were all from different batches.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
Damm thanks guys, I did'nt think so it was more of a foreloarn hope.....
Steelteks That better
Tony
I know I should ask the local tyre shop BUT I'm lazy .
Does anyone know of ANY brand of 750x16 that comes as tubeless?
Its a long story but my camper came with splits and 750x16. I have replaced the wheels with Rangie mags and 205s but have lost a bit of ground clearance, and the spare is underneath the A and a leetle low.
Some cheap 750 tubeless would be ideal.
Few of the tyre sites specify whether their 750x16s are tubed or tubeless.
And I know 235x85.16 are tubeless but they are wider than 205's or 750s so what I gain in diameter I would lose in width of the spare.
Regards Philip A
any 750R16 rated tyre should be tubless
bridgestone, goodyear and a couple others come to mind.
eg
http://www.bridgestone.com.au/tyres/...reads/d693.asp
Last edited by incisor; 27th September 2007 at 08:05 AM.
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
I have been running 7.50R16s for a few years now, originally Michelins (ex-Defender) without tubes on Disco rims. I had no problems with tyre life or general sealing. They were prone to popping beads at low pressures though, mainly on slow rocky terrain.
Last year, I bought a set of 7.50 retreads & supplied 5.5" Defender rims for them to be fitted onto. I also asked them to fit tubes.
The tyre shop asked me I why I was wanting tubes fitted as they could fit them without. I pointed out that the rims were not safety rims & they still said I could have them as tubeless. I insisted on tubes anyway.
I now have the same retreads on Disco rims & I am running them tubeless. As with the Michelins before, I have no tyre life issues & haven't experienced too many bead problems (less than the Michelins).
I've just been out to check the tyres - 2 are marked "tube type", the other 2 don't appear to be marked.
Therefore, in my experience, you could successfully run 7.50R16s as tubeless on safety rims.
Scott
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks