Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: Wheel bearing locking nut tool

  1. 27th September 2007, 08:17 PM #1
    DassaW's Avatar
    DassaW
    DassaW is offline Master
    Join Date
    Jan 1970
    Location
    Outer east Melb
    Posts
    128
    Total Downloaded
    0

    Wheel bearing locking nut tool

    Guys,
    does anyone know what size socket I need to fit on the wheel bearing locking nuts on a disco 1? I think its about 52mm but not exactly sure.

    Cheers
    Reply With Quote Reply With Quote
  2. 27th September 2007, 08:22 PM #2
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,495
    Total Downloaded
    0
    sounds right, why not do what just about every stripey does...

    hammer and cold chisel....
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  3. 27th September 2007, 08:28 PM #3
    gromit's Avatar
    gromit
    gromit is offline ForumSage Supporter
    Join Date
    Jan 1970
    Location
    Narre Warren South
    Posts
    6,796
    Total Downloaded
    0
    DassaW,

    Actual socket size is 1 3/8 BSF, best of luck finding one.

    A 2 1/16 AF socket will fit or buy a box spanner from Four Wheel Drives in Blackburn for about $7 plus GST.
    Metric measurement was about 52.12 from memory (checked the series 1 just the other night).


    Gromit
    '56 Series 1 with homemade welder
    '65 Series IIa Dormobile
    '70 SIIa GS
    '76 SIII 88" (Isuzu C240)
    '81 SIII FFR
    '95 Defender Tanami
    Motorcycles :-
    Vincent Rapide, Panther M100, Norton BIG4, Electra & Navigator, Matchless G80C, Suzuki SV650
    Reply With Quote Reply With Quote
  4. 27th September 2007, 08:30 PM #4
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,495
    Total Downloaded
    0
    ive got 2 a 52mm and a 54mm I know they both work tho the 54mm one is a touch sloppy.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  5. 27th September 2007, 08:31 PM #5
    Grimace's Avatar
    Grimace
    Grimace is offline YarnMaster Silver Subscriber
    Join Date
    Jan 1970
    Location
    Gold Coast, QLD
    Posts
    3,570
    Total Downloaded
    0
    Its 52mm. I have a socket and 4 lock nuts infront of me
    I rule!!!

    2.4" of Pure FURY!!!
    Reply With Quote Reply With Quote
  6. 27th September 2007, 08:31 PM #6
    weeds's Avatar
    weeds
    weeds is offline Swaggie
    Join Date
    Feb 2005
    Location
    Bracken Ridge - Brisbane - QLD
    Posts
    14,276
    Total Downloaded
    0
    Go the box spanner, it travels everywhere I go

    Depending on who did the nuts up last you may need to give it a bit of a knock with a chisel to get the outer nut moving
    Reply With Quote Reply With Quote
  7. 27th September 2007, 08:33 PM #7
    DassaW's Avatar
    DassaW
    DassaW is offline Master
    Join Date
    Jan 1970
    Location
    Outer east Melb
    Posts
    128
    Total Downloaded
    0
    I didnt have a cold chisel either, so ended up trying multi grips!!

    thought I better get something that will fit a bit better, thanks for the quick replies, Ill try that box spanner from blackburn.

    Cheers
    Reply With Quote Reply With Quote
  8. 27th September 2007, 08:34 PM #8
    sumo
    sumo is offline Master
    Join Date
    Jan 1970
    Posts
    417
    Total Downloaded
    0
    Quote Originally Posted by Blknight.aus View Post
    sounds right, why not do what just about every stripey does...

    hammer and cold chisel....
    OH, dear!!! dosen't that phuck things up!!!.

    That little Bur on the out side of the nut??????.


    Cheers Sumo
    Reply With Quote Reply With Quote
  9. 27th September 2007, 08:46 PM #9
    dmdigital's Avatar
    dmdigital
    dmdigital is offline OldBushie Vendor

    Gold Subscriber
    Join Date
    Jun 2006
    Location
    Arnhem Land, NT
    Posts
    8,492
    Total Downloaded
    0
    They are about $25 from roverparts.com.au. I couldn't be bothered fabrcating one and I was ordering other stuff at the time.
    MY15 Discovery 4 SE SDV6

    Past: 97 D1 Tdi, 03 D2a Td5, 08 Kimberley Kamper, 08 Defender 110 TDCi, 99 Defender 110 300Tdi[/SIZE]
    Reply With Quote Reply With Quote
  10. 27th September 2007, 09:04 PM #10
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,495
    Total Downloaded
    0
    Quote Originally Posted by sumo View Post
    OH, dear!!! dosen't that phuck things up!!!.

    That little Bur on the out side of the nut??????.


    Cheers Sumo
    only when it comes off the nut and decides it wants to go and be freinds with the rollers in the bearing and being absent from the nut allows the nut to rotate off 2 turns..


    Whats really really scary is when as part of an inspection for a service you find a little rim rock so you pull down the front right hub of a 110 and find that the outer nut has the chisel marks in both direction, on both sides, on multiple facets of the nut, Then when you finally manage to get the lock washer off you find that the inner nut has chisel marks in both directions and the damage on the inner nut had pressed into the lock washer. Then when you finally manage to get that inner nut out you find that on the other side of that nut is...... more chisel marks.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
Page 1 of 3 123 LastLast
« Grommet gets a Canvas 3/4 Tilt and a Roll Bar | P76 and ZF Gearboxes »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!