Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Swivel Hub Grease

  1. #1
    Join Date
    Jan 2007
    Location
    Warragul, Victoria
    Posts
    1,989
    Total Downloaded
    0

    Question Swivel Hub Grease

    To some it will seem heretical, but I have grease in my hubs.
    Just a few questions if I may.

    1/ How often does it have to be topped up?
    2/ Is there another product that can be used instead of the Landrover One Shot Grease?

    Any input will be gratefully accepted.

  2. #2
    Join Date
    Jan 1970
    Location
    Melrose SA
    Posts
    2,838
    Total Downloaded
    0
    1/ It depends upon how fast its leaking out
    2/ Do a search on this forum for Penrite liquid grease

    That should answer your questions

  3. #3
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,152
    Total Downloaded
    0
    1/ How often does it have to be topped up?
    2/ Is there another product that can be used instead of the Landrover One Shot Grease?
    1 If no leaks never. If through water change it, by mixing ATF , a short drive then drain.
    2 Most specialists eg Graeme Cooper have their own or Penrite.
    Regards Philip A

  4. #4
    p38arover's Avatar
    p38arover is offline Major part of the heart and soul of AULRO.com
    Administrator
    I'm here to help you!
    Gold Subscriber
    Join Date
    Jan 1970
    Location
    Western Sydney
    Posts
    30,706
    Total Downloaded
    1.63 MB
    The Penrite Semi-Fluid grease isn't carried by all Penrite stockists. It's in the Penrite classic car range.

    I bought three 450g tubes the other day from my local supplier (he ordered it in for me).

    Ron
    Last edited by p38arover; 10th October 2007 at 07:04 PM.
    Ron B.
    VK2OTC

    2003 L322 Range Rover Vogue 4.4 V8 Auto
    2007 Yamaha XJR1300
    Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA



    RIP Bucko - Riding on Forever

  5. #5
    Join Date
    Jan 2007
    Location
    Warragul, Victoria
    Posts
    1,989
    Total Downloaded
    0
    Thanks for the replys cobbers.
    I take it it's Penrite Moly3 percent grease that I'm after.
    Do I fill as per oil or just squirt a bit in?

  6. #6
    d@rk51d3 Guest
    If I recall correctly, I packed mine with black moly grease about 5 years go. Since I've just done a trip from Adelaide to Darwin and back, I suppose I should check them again...... when I replace the output shaft seals on the tranfer case.....sometime soon...... maybe.

  7. #7
    Join Date
    May 2007
    Location
    Safety Bay
    Posts
    8,041
    Total Downloaded
    0
    You just buy the one shot tube from LR.It's there for life or until you pull it apart. Pat

  8. #8
    Join Date
    Jan 2007
    Location
    Warragul, Victoria
    Posts
    1,989
    Total Downloaded
    0
    Quote Originally Posted by PAT303 View Post
    You just buy the one shot tube from LR.It's there for life or until you pull it apart. Pat
    I'm trying to avoid getting ripped off here remember, Landrover Parts Service is an Oxymoron.

  9. #9
    mcrover Guest
    Im not sure what sort of grease it is but what about the Shell Alvania running grease?, I have a drum of it at work so I might repost with specifics tomorrow.

    One of you guys would probably know what Im talking about though, I was thinking about using it but I aswell want to be sure it will do the job.

    What is the one shot grease? is it the same as the penrite?

    Maybe I should have started another thread as this might be considered a Hyjack.

    If so just tell me to sod off

    At the moment I think mine are running in oil and I dont think thats a good thing but Im changing the discs shortly (Yes Dean I will give you a yell) and so bearings etc will be changed so I will need to refill.

  10. #10
    p38arover's Avatar
    p38arover is offline Major part of the heart and soul of AULRO.com
    Administrator
    I'm here to help you!
    Gold Subscriber
    Join Date
    Jan 1970
    Location
    Western Sydney
    Posts
    30,706
    Total Downloaded
    1.63 MB
    Quote Originally Posted by Hymie View Post
    Thanks for the replys cobbers.
    I take it it's Penrite Moly3 percent grease that I'm after.
    Do I fill as per oil or just squirt a bit in?
    No. It is called Penrite Semi-Fluid Grease.

    See http://www.penrite.com.au/files/2ZIIFZOTFD/SEMI-PIS.pdf

    See also http://www.aulro.com/afvb/archive/in...p/t-18835.html

    and

    http://forums.overlander.com.au/view...9b157dc4267cc4
    Ron B.
    VK2OTC

    2003 L322 Range Rover Vogue 4.4 V8 Auto
    2007 Yamaha XJR1300
    Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA



    RIP Bucko - Riding on Forever

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!