Reply With Quotevery nice may i ask where you got your black chequer plate from i'm trying to source some for the new defender...........and to know where to get it when needed for the disco
thanks
lou
Master
Finally got the Scorpion Racing Evolution Kit finished today ! Was waiting on the right extended brake line to finish the job!
Kit contains:
2 x New lower Front Shock Tarrets
2 x Front coil re-locte cones
4 x Urathane Bump stops
2 x rear Re-locate cones
2 x rear cranked arms
4 x braided steel extened brake lines
2 x rear upper shock mounts (lowering shock mounts)
All went in like a glove, did not have much to test it on, we stacked up 4 x tyres, a pallet and a 4wd Ramp to get her up, was still not on complete articulation but gives you the idea ! Am itching to try it out somwhere
Cheers
Admin
very nice may i ask where you got your black chequer plate from i'm trying to source some for the new defender...........and to know where to get it when needed for the disco
thanks
lou
Our Land Rover does not leak oil! it just marks its territory.......
Master
I brought full sheets of checkerplate, made templates, cut it out and painted it up. I think you can buy pre-made stuff from Rovacraft here in Perth.
Cheers
Jeremy
ChatterBox
Looking good Jezza,I have that kit on my Fender , but always chasing more articulation I have found the shocks to be the achillies heel.
Since I have a company car now... I'm going for the Extreme Kit extras ie the Fox type shocks and mounts and the total dislocating spings
like this
as it wont be used for towing anymore just a toy
TopicToaster
That is a nice truck shame the chap Dave can't drive for toffee.Originally Posted by DirtyDawg
as it wont be used for towing anymore just a toyUsed to race against him in challenge events and the Nas spec rear step on my 90 came off the back of this truck
But the truck does look like he magnestised the car and ram raid scorpion and fitted everything that stuck to it
95 300 Tdi Defender 90
99 300 Tdi Defender 110
92 Discovery 200tdi
50 Series 1 80
50 Series 1 80
www.reads4x4.com
TopicToaster
dont say that too loud round here! all the anti dis location spring nazi's will burn your house downLooking good Jezza,I have that kit on my Fender , but always chasing more articulation I have found the shocks to be the achillies heel.
Since I have a company car now... I'm going for the Extreme Kit extras ie the Fox type shocks and mounts and the total dislocating spings
like this
as it wont be used for towing anymore just a toy
cheers phil
Master
Here's a couple from taoday !
Wizard
Looks like we are running the same suspension Jezza
Different Discos I know but am interested as to what shocks you have ie part numbers
A 2'' lift I know you have
A 2'' body lift which I cant have
Is there such a kit for the D2
Master
Hey Ken,Looks like we are running the same suspension Jezza
Different Discos I know but am interested as to what shocks you have ie part numbers
A 2'' lift I know you have
A 2'' body lift which I cant have
Is there such a kit for the D2
Coils Front : TDC504
Rear Coils : TDC518H
Check out www.4waysuspension.com.au for catalog
Front shocks : Foam Cell FC41049
Rear shocks : Foam Cell FC41398
And 40mm 1 1/2" not 2" Body Lift
Note: Front and rear shocks and coils list a different part number for a D2.
Wizard
Cant be much in it as far as travel goes
The fact that you have lowered shock turrets will make a difference though
as far as part numbers go will check out the difference in open and closed lengths
as far as I know the D1 is pin to eye in the shocks and a D2 is eye to eye so Id say at a glance that would be the difference in part numbers
Your Disco looks great
am still searching for a front steering guard as every time I call someone they are all gone
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks