Replaced head gasket now wont start 300 TDi

Ok i have identified it is the front cylinder, what do i need to do, it wont clear itself and i have tried bleeding it. Any ideas.
rgs Les

Everone thanks for your help, it beat me and is on its way to the shop, but gee i learnt a lot.
rgs Les

let us know what it turns out to be

Electrolosus, was the problem, i was chasing my tail, the smoke was steam again.
rgs Les

Ignore me...... i'm lost....

so the head was eaten out at a water galery and entering no1 cyl and causeing the steam ect. when i rebuilt my 300tdi the head was very close to failing in a water galery. when or if it does fail in the next 3/4 years i should be able to just get another head knowing my bottomend is strong as an ox

Hi all,
A bit of advice if unsure on your own ability dont chase your tale go to the experts, my outcome was over $4500 at the shop,it is now fixed, i got a new head etc, etc, etc.
thanks again for everyone who had input to my problem, everyone was on the money, i just had it all.
rgs Les