Results 1 to 7 of 7

Thread: Stud pattern

  1. 18th February 2008, 10:03 AM #1
    Koukandowie Brangus's Avatar
    Koukandowie Brangus
    Koukandowie Brangus is offline Master Gold Subscriber
    Join Date
    Nov 2006
    Location
    Alice Springs, Australia
    Posts
    360
    Total Downloaded
    0

    Stud pattern

    Can someone please tell me the stud pattern size for a defender 130 wolf rim. Is it PCD 5x6.5" ???? this means 5 studs on 6 1/2 inch circle doesn't it?? and the studs are 14 mm opposed to the more common 12???

    I am just trying to order soem hubs for my camper and need to get the right ones.

    thanx
    Cheers from the Desert
    Rexy
    2000 130 TD5
    Oil in the Harness, suspension knock, transmission clunk, engine oil leaks, exhaust manifold leaks, centrifugal oil filter stripped bolts, a/c leaks, door leaks, wouldn't trade it for the world
    Reply With Quote Reply With Quote
  2. 18th February 2008, 11:07 AM #2
    rick130's Avatar
    rick130
    rick130 is offline Moderator Gold Subscriber
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    yep, PCD is 6.5"/165.1mm so 5 x 6.5"

    Stud size is either 16mm or 5/8" (couldn't easily measure with the wheel still on and couldn't be bothered getting the pitch gauge out)
    Reply With Quote Reply With Quote
  3. 18th February 2008, 11:10 AM #3
    numpty's Avatar
    numpty
    numpty is offline TopicToaster Silver Subscriber
    Join Date
    Jan 1970
    Location
    Nundle
    Posts
    4,077
    Total Downloaded
    0
    Stud size is 16mm. Which is only a smidgin different to 5/8" anyway. And pre Series 3 they were 9/16".
    Numpty

    Thomas - 1955 Series 1 107" Truck Cab
    Leon - 1957 Series 1 88" Soft Top
    Lewis - 1963 Series 11A ex Mil Gunbuggy
    Teddy5 - 2001 Ex Telstra Big Cab Td5
    ​Betsy - 1963 Series 11A ex Mil GS
    REMLR No 143
    Reply With Quote Reply With Quote
  4. 18th February 2008, 11:11 AM #4
    JDNSW's Avatar
    JDNSW
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,517
    Total Downloaded
    0
    PCD is right, but the studs are 16mm not 14mm.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
  5. 18th February 2008, 01:36 PM #5
    Koukandowie Brangus's Avatar
    Koukandowie Brangus
    Koukandowie Brangus is offline Master Gold Subscriber
    Join Date
    Nov 2006
    Location
    Alice Springs, Australia
    Posts
    360
    Total Downloaded
    0
    thanx fella's
    Cheers from the Desert
    Rexy
    2000 130 TD5
    Oil in the Harness, suspension knock, transmission clunk, engine oil leaks, exhaust manifold leaks, centrifugal oil filter stripped bolts, a/c leaks, door leaks, wouldn't trade it for the world
    Reply With Quote Reply With Quote
  6. 18th February 2008, 03:41 PM #6
    JDNSW's Avatar
    JDNSW
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,517
    Total Downloaded
    0
    Quote Originally Posted by numpty View Post
    Stud size is 16mm. Which is only a smidgin different to 5/8" anyway. And pre Series 3 they were 9/16".
    The change to 16mm actually happened during late S2a production - and I have actually seen one! What I have not seen, is the optional nuts the same 27mm outside as the 16mm, but with 9/16" BSF thread.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
  7. 18th February 2008, 03:47 PM #7
    PhilipA
    PhilipA is offline Swaggie Subscriber
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,152
    Total Downloaded
    0
    Look in the ALKO catalogue.
    The hubs are listed.

    Be careful if you want to fit mags as ALKO only do studs in UNF. OK for steel wheels, if you buy the nuts with the hubs, but the LR nuts will not fit.
    Regards Philip A
    Reply With Quote Reply With Quote
« 14" 4x4 tyres ? | getting gas done »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!