Results 1 to 4 of 4

Thread: tdi300 idler adjusting pulley

  1. 25th February 2008, 08:59 PM #1
    bblaze
    bblaze is offline Wizard Subscriber
    Join Date
    Apr 2007
    Location
    NW Tassie
    Posts
    1,884
    Total Downloaded
    0

    tdi300 idler adjusting pulley

    tryed to undo the bolt that holds the idler/tensioner pulley to the adjusting unit and broke the bloody bolt. Is it left or right hand thread? I have already undone the one for the aircon and that is a normal right hand thread, seems a bit strange for the main one to be left hand, Guess I will have to drill the sucker out and lucky I have a spare I guess. Seems like the crap ya get when tring to do a bit of preventive maintance as neither of them really needs new bearings but seeing I had spare units I thought I would do the right thing.
    cheers
    blaze
    ps
    Seem to be just standard 6203 bearings?
    Reply With Quote Reply With Quote
  2. 25th February 2008, 09:12 PM #2
    87County's Avatar
    87County
    87County is offline AT REST
    Join Date
    May 2007
    Location
    in the wild New England, NSW
    Posts
    4,918
    Total Downloaded
    0
    if you mean the serpentine (long) alternator drive belt tensioner pulley - yes it is opposite (l/h) to normal thread so it doesn't come undone when you use the head of it to release the spring tension to remove the belt....

    if you snapped it are you able to get the remainder out?

    regards - Laurie

    ps yep - std brgs - also try a search here for 6203ZZ
    Last edited by 87County; 25th February 2008 at 09:16 PM. Reason: add info
    Reply With Quote Reply With Quote
  3. 25th February 2008, 09:24 PM #3
    bblaze
    bblaze is offline Wizard Subscriber
    Join Date
    Apr 2007
    Location
    NW Tassie
    Posts
    1,884
    Total Downloaded
    0
    learnt that lesson the hard way then havnt I, them lessons ya never forget. I will build it up with the mig and weld a nut on it to get it out I think.
    thanks
    cheers
    blaze
    Reply With Quote Reply With Quote
  4. 25th February 2008, 09:35 PM #4
    87County's Avatar
    87County
    87County is offline AT REST
    Join Date
    May 2007
    Location
    in the wild New England, NSW
    Posts
    4,918
    Total Downloaded
    0
    yeh that'd work... but I'm wondering just where you get a replacement...

    also; if you take the mounting stud for the adjuster unit out for any reason (like it came out with the nut) there is a right and wrong end for it to go back in...

    Laurie
    Last edited by 87County; 25th February 2008 at 09:38 PM. Reason: add info
    Reply With Quote Reply With Quote
« abs solution..and a win for the hip pocket! | Idle speed fluctuations »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!