when considering doing this you may want to check with your insurance company as it may void any claim you may have in the future !
dont forget that airbags are a safety component !
To my learned colleagues. Does anybody know if the SRS airbag can be removed permanently from a series 1 discovery?
I only have the drivers side airbag, no passenger side. If the srs airbag can be disconnected and removed, then I can fit a tube bar to the front of the car as well, rather than the huge protruding ARB or TJM offerings.
Regards
Goldey
Just arrived: 2012 D4 3.0 HSE, the journey begins again ;-).
Gone: 98 Disco 300tdi Auto, and some extras
when considering doing this you may want to check with your insurance company as it may void any claim you may have in the future !
dont forget that airbags are a safety component !
have a good one :D ken :wasntme:
MY07 L320 RANGE ROVER SPORT MORE GOODNESS TO COME
MY03 D2A TD5 EXTRA GOODIE ENHANCED :D now parting from life
1996 D1 300TDI GONE
08 ford ranger c/c
WRECKING DISCOVERY 2
PM ME FOR WHAT YOU ARE LOOKING FOR
I agree it is a safety component, but after surviving the daily commute for many years aboard a motorbike, my biggest safety component is between my ears and I wouldn't necessarily grieve the airbag disappearing.
But good point about the insurance company. Will follow them up today.
Cheers
Goldey
Just arrived: 2012 D4 3.0 HSE, the journey begins again ;-).
Gone: 98 Disco 300tdi Auto, and some extras
My understanding is that SRS when fitted is a roadworthy requirement and cannot be removed legally.
Cheers
Wayne
I asked Qld Transport (the actual inspector guys at the government inspection stations) and they said it is fine to remove the SRS airbags from a Disco1. I assume it is okay as the Disco1 had airbags as an option. The lower spec models passed ADRs without the airbags.
I ended up finding a Disco1 without airbags anyway so I didn't need to remove them.
I would verify anything you do with your local rta. My understanding of the law is if it was sold with it it must be retained and keep to manufaturers standard. Be careful becausethis sort of mod may get you a red sticker.
2011 Discovery 4 TDV6
2009 DRZ400E Suzuki
1956 & 1961 P4 Rover (project)
1976 SS Torana (project - all cash donations or parts accepted)
2003 WK Holden Statesman
Departed
2000 Defender Extreme: Shrek (but only to son)
84 RR (Gone) 97 Tdi Disco (Gone)
98 Ducati 900SS Gone & Missed
Facta Non Verba
No doubt it changes state to state but my understanding is that you can fit and remove optional equipment. Which ABS and airbags were on a Disco1.
I mean removal and not disconnection. Removing of every part and returning the vehicle to standard spec.
A friend of mine had his commodore knocked back on a roadworthy many years ago because his air con didn't work. He was told to fix it or remove it entirely. Not a safety issue but optional equipment still.
Thanks for the reply's and assistance all.
For those of us residing in NSW, I am chasing the technical branch of the RTA for an "in writing" ruling on the issue. My interest lies in removing the airbag so as to be able to install a non-airbag compliant bullbar.
Will let you know how I go.
Cheers
Goldey
Just arrived: 2012 D4 3.0 HSE, the journey begins again ;-).
Gone: 98 Disco 300tdi Auto, and some extras
| Search AULRO.com ONLY! | 
    Search All the Web! | 
  
|---|
| 
 | 
 | 
Bookmarks