Results 1 to 5 of 5

Thread: Fuse box, S1 Disco 95 (up-date model) help?

  1. 6th April 2008, 04:39 PM #1
    up2nogood Guest

    Fuse box, S1 Disco 95 (up-date model) help?

    Hey guys,
    Can't find the pic I took of the wiring before I disconnected it all......

    There are three power wires located at one end of the fuse box in the engine bay. They are actaully bolted on, so you can't miss 'em:
    * Fuse panel to firewall power stud under the brake booster RED
    * Alternator power feed (heavy cable) BROWN
    * Power out to relay (light cable) BROWN

    At the end of the fuse panel we're talking about, the cables are separated by a hole/gap in the plastic casting. On one side is two bolt holes, the other one. Assuming one is for power in and the other for power out......

    My suspicion is the red power wire goes on the side where there is only one bolt, and the other two are on the other side. Although the light brown relay wire on this car was routed from the same outlet below the brake booster as the red was......

    When you have a spare couple of minutes, could someone let me know which ones run from where?

    I will try to take a pic when our camera batteries are recharged........
    Last edited by up2nogood; 7th April 2008 at 08:00 AM.
    Reply With Quote Reply With Quote
  2. 6th April 2008, 10:32 PM #2
    langy's Avatar
    langy
    langy is offline Wizard
    Join Date
    Jan 1970
    Location
    Somewhere else, QLD
    Posts
    1,863
    Total Downloaded
    0
    Here's a pic of a 300tdi fusebox




    The feed from the alternator comes in at the top bolt. The connection to the battery is the bottom bolt. I'm not quite certain where your red wire connects to, or what that other brown wire is ( My glowplug timer relay connects direct to the battery)
    Reply With Quote Reply With Quote
  3. 7th April 2008, 06:07 AM #3
    up2nogood Guest
    Quote Originally Posted by langy View Post
    Here's a pic of a 300tdi fusebox




    The feed from the alternator comes in at the top bolt. The connection to the battery is the bottom bolt. I'm not quite certain where your red wire connects to, or what that other brown wire is ( My glowplug timer relay connects direct to the battery)
    Cheers mate, just a couple more q's to clarify:
    * you've only got the two wires running from yours?
    * the alternator feed goes on the very front (and upper in the pic)?
    * the power from the battery goes to the lower one in the pic?
    * You wouldn't be able to do me a close up of the fuse panel lid, would you? I don't have one......

    Thanks!
    Attached Images Attached Images
    Last edited by up2nogood; 7th April 2008 at 07:58 AM.
    Reply With Quote Reply With Quote
  4. 7th April 2008, 03:02 PM #4
    langy's Avatar
    langy
    langy is offline Wizard
    Join Date
    Jan 1970
    Location
    Somewhere else, QLD
    Posts
    1,863
    Total Downloaded
    0
    As requested:

    Attached Images Attached Images
    Reply With Quote Reply With Quote
  5. 7th April 2008, 04:26 PM #5
    up2nogood Guest
    Sweet, thanks for that!
    Reply With Quote Reply With Quote
« Converting rear shock mount to pin Defender? | Serpentine belt tensioner, 300TDi »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!