Results 1 to 4 of 4

Thread: auto flexi plate

  1. 29th April 2008, 09:02 PM #1
    neil-d1's Avatar
    neil-d1
    neil-d1 is offline Fossicker
    Join Date
    Apr 2007
    Location
    melbourne
    Posts
    51
    Total Downloaded
    0

    auto flexi plate

    is it normal to have a bit of play between plate and the centre piece where the bolts go?
    Reply With Quote Reply With Quote
  2. 29th April 2008, 10:21 PM #2
    mike 90 RR Guest
    Can you expand a bit more this subject?
    Are you talking about the Torque converter & the flexplate with ring gear
    or you bolting the flex plate up to the crank

    So long as the bolt holes are not "Reamed" from being loose and are a good fit to the bolts then all should be OK
    However if you "start" all the bolts and its sloppy then you should be wary

    HOWEVER
    If you are replacing a new for old, and they have different hole diameters, then i would suggest that you have the wrong part / Take it back
    Last edited by mike 90 RR; 30th April 2008 at 10:19 AM.
    Reply With Quote Reply With Quote
  3. 30th April 2008, 07:01 PM #3
    George130's Avatar
    George130
    George130 is offline ForumSage
    Join Date
    Jan 1970
    Location
    Yass NSW
    Posts
    7,239
    Total Downloaded
    0
    If when bolted it has play then it is broken.
    If the bolts are smaller than the holes then either the bolts or the plate are wrong. Hope this helps.
    Reply With Quote Reply With Quote
  4. 1st May 2008, 10:15 PM #4
    neil-d1's Avatar
    neil-d1
    neil-d1 is offline Fossicker
    Join Date
    Apr 2007
    Location
    melbourne
    Posts
    51
    Total Downloaded
    0
    the answer is no there should not be any play. the whole centre had ripped out, but as i had never seen one of these b4 and it was late at night i couldnt see the woods for the trees.
    Reply With Quote Reply With Quote
« Transfer Case Oil additives - Yes or No? | LT 95 Transfer Teeth »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!