Results 1 to 4 of 4

Thread: Torque converter spacing Tdi

  1. 2nd May 2008, 06:13 PM #1
    51jay Guest

    Torque converter spacing Tdi

    To ensure that you have the TC correctly fitted you check the distance between the front bosses of the TC and the front face of the bell housing. In the V8 ZF box this is 50mm.
    Can anyone tell me if this is the same distance in the TDi ZF box or different, and, if different what it should be.
    It has been 14 months now....I really would like to get my Rangie back on the road.
    Reply With Quote Reply With Quote
  2. 3rd May 2008, 09:51 PM #2
    51jay Guest
    Where's a Guru when you need one??
    Come on guys... I'm desperate, Can't afford to buy a genuine Disco workshop manual and we have now put this box on 3 times.... I'm getting old and tired
    Reply With Quote Reply With Quote
  3. 3rd May 2008, 10:18 PM #3
    B92 8NW
    B92 8NW is offline YarnMaster
    Join Date
    Jan 1970
    Location
    VIC
    Posts
    3,536
    Total Downloaded
    0
    According to RAVE manual:

    17. "Refit torque converter into housing using torque
    converter handles 18G1501, checking that
    dimension from converter fixing bolt boss to
    converter housing face is 50 mm. This shows
    converter is properly seated in housing."

    and:

    ZF GEARBOX DATA
    Axial end float 0.2 to 0.4 mm.
    From torque converter boss to torque converter
    housing face 50 mm
    Freewheel cage assembly to ring gear; minimum
    clearance 0.1 mm
    Output shaft above cylinder F assembly; dimension
    10.00 mm
    A cylinder protrusion above gearbox front face not
    more than 8.5 mm

    It must be the same as the V8.
    Reply With Quote Reply With Quote
  4. 3rd May 2008, 10:43 PM #4
    51jay Guest
    Thankyou for that, yep looks like its the same as the V8. I thought it probably would be but probably wasn't good enough I really needed to know.
    Thanks again,...hopefully it will be a case of 4th time lucky and I will finally be mobile again
    Reply With Quote Reply With Quote
« Oil Fed Wheel bearings on Disco.. Anyone done it succesfully | Disco Brake Reservoir »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!