Yep - it handily illuminates all the broken bits for you !
It's not broken. It's "Carbon Neutral".
gone
1993 Defender 110 ute "Doris"
1994 Range Rover Vogue LSE "The Luxo-Barge"
1994 Defender 130 HCPU "Rolly"
1996 Discovery 1
current
1995 Defender 130 HCPU and Suzuki GSX1400
Regarding LEDs for interior lights, don't know enough about them to comment. However I do like the interior light bright enough to be able to read things at times. On my Defender have bent the globe holding terminals so they take an 18 watt globe instead of standard 10 watt and left the cover off. Regard it as just an unnecessary thing that causes trouble, reducing the light intensity and would probably melt anyway. eg As some taillights are prone to with more powerful globes intended for indicators or stoplights that are okay for intermittent use are run continuously.
Regarding batteries, I normally run 86's, which are slightly bigger than the standard one and commonly used in tractors and trucks. Takes a long time to flatten a good one from the interior light. Fortunately my 300Tdi starts very easily and using the glowplugs makes it quicker still. Can get away with using 86 batteries too old and sick to start tractors.
Don't know about all Defenders, but in our Td5, if you leave the door open, the interior light goes out after 8 mins.
If the batteries are manually isolated, I can't see the flatter battery discharging the good battery, as everything operates from the battery selected, and at all times is isolated from the other, unless of course the manual switch is switched to Both.
Numpty
Thomas - 1955 Series 1 107" Truck Cab
Leon - 1957 Series 1 88" Soft Top
Lewis - 1963 Series 11A ex Mil Gunbuggy
Teddy5 - 2001 Ex Telstra Big Cab Td5
Betsy - 1963 Series 11A ex Mil GS
REMLR No 143
A handy trick for starting diesels that need to be heated before starting (not usually modern LRs) is to tip a kettle of hot water over the glow plugs before attempting to start with a low battery. This prevents the glow plugs from draining the last of the charge from the battery if you crank it as soon as you turn the key on.
A trick learnt with old farm hiluxes with dodgy batteries.
Direct Injection diesels such as TDI /TD5 usually will start without glow plugs anyway.
Regards,
Tote
I don't know what tipping hot water on the glow plugs will achieve. Do they have a temperature sensor in them, and the hot water will turns them off, hence saving power? But this will not significantly warm the engine, in order to ease starting. Diesels need heat in order to start, and if you are low on power, you could carefully try lighting a small fire underneath the engine. The heat warms the oil so that the engine will turn over quicker, and the heat buildup will aid starting. Alternatively, just warm the inlet manifold, so warmed air is drawn into the engine. Old Bedfrod diesel engines had a heater plug in the inlet manifold, and none in the engine. If you can push/hill start it, this will turn the engine over faster, and start it quicker.
Aaron.
Warming the injectors will probably help to start a cold engine. But in my 2.25D, the glouw plugs heat the inside of the pre-combustion chamber. But I suppose the glow plug heating element would also heat the tip of the injector.
Aaron.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks