Tools for 300tdi timing belt change

Quote:

---

Originally Posted by Disco300Tdi

My crank locking tool was the passenger side chassis rail

Fit a socket to the cranfshaft bolt, the add a breaker bar with a short piece of pipe, rest it on the chassis rail and quikly click the starter.

Some will give me a spray about doing it this way, but I have done it on most of all the vehicles I have owned and never had a problem.

---

That's fine for the un-doing part - it's the doing up bit that you need a locking tool for - especially on an auto.

PS. Whenever you remove or torque a crank bolt, always put a shield in front of the radiator. A bit of sheet steel is fine.

/Damien

Quote:

---

Originally Posted by Blknight.aus

butcher.......... (I do it too IF I dont have all the good gear with me)

---

:D:D:D..Never had the gear on hand,,,only a beer in hand..:D:D:D

Quote:

---

Originally Posted by damienb

That's fine for the un-doing part - it's the doing up bit that you need a locking tool for - especially on an auto.

PS. Whenever you remove or torque a crank bolt, always put a shield in front of the radiator. A bit of sheet steel is fine.

/Damien

---

Thats what rattle guns are for...:p

PS. much easier if you remove the radiator first ;)