Master
when my window is right up, and i then try to make it go down, the rear section wont drop without some coaxing, causing it to get stuck. once the intial 2-3cm is done its all fine. it goes back up no problems, and if it was already slightly down it is also ok. is it likely that i have something caught in the window channel on this side? any help/ideas would be great.
thanks.
ChatterBox
I had this happen to me a while back and it turned out to be a broken plastic slide in the window mechanism. Basically the plastic part that slides along the channel had disintegrated and was catching near the top of the track but was working fine when in the middle of going up or down. Ended up having to replace the whole window mechanism...................I mean why should the little pastic part costing a few cents be sold separately
Aye, Mick
'99 Manual TD5 D2.......heap of money spent on it and it has ended
ChatterBox
What he said.^^^^^^^^^^^^^^............but there is a less expensive fix , do a search ... there is a post which covers this (I think it was by waynep) where you replace the plastic rollers with ones from Bunnings @ about $5.00 !!!Originally Posted by MickG
I had this happen to me a while back and it turned out to be a broken plastic slide in the window mechanism. Basically the plastic part that slides along the channel had disintegrated and was catching near the top of the track but was working fine when in the middle of going up or down. Ended up having to replace the whole window mechanism...................I mean why should the little pastic part costing a few cents be sold separately
Aye, Mick
ChatterBox
Now you tell me
'99 Manual TD5 D2.......heap of money spent on it and it has ended
ChatterBox
Now you tell me
Oooopppssss sorry, but do you know the saying ........the search button is your best friend.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Reply With Quote
Bookmarks