Thread: Recomendations for aftermarket camshaft 3.5V8

Camshaft and lifters buggered in my son's Stage 1 3.5 V8, so I'm looking for a replacement, have heard that the cam from a 3.9 is good, but where do you buy a new one at a reasonable price.
Are there any aftermarket cams available and if so has anyone any advice, recomendations, where to purchase, I checked out Crane and they don't seem to have anything for Land Rovers, any help appreciated, Regards Frank.

I used a Dynotec CM215D
Cam Type HYD
SAE Duration INT 271
SAE Duration EXH 271
.050 Duration INT 196
.050 Duration Exh 196
SAE Over Lap 54
.050 Over Lap -22
Camlift Int .250
Camlift Exh .250
Valve Lift INT .402
Valve Lift Exh .402
Lobe Centres INT 106
Lobe Centres EXH 112
Lobe Spread 109
Lash Int Hyd
Lash Exh Hyd

Overall seems great for torque top end isnt great on mine but the industrial aircleaner and ancient manifolds dont help that

Triumph Rover Spares in Adelaide supplied it and Im impressed I did once go too far and put an MG cam in a Range Rover and this was a really dumb thing to do great if you want to go everywhere flat out.