Reply With Quotethere are a few of us in this position, mine are on there way out, but i think we are out of luck. hopefully someone can tell me otherwise.
Master
Doing some research for my mechanic mate. He has a 2000 Disco Td5 at the moment. Symptoms were rough running sometimes fine, sometime 3 cylinders etc...
Tracked the problem down to the plug where the main loom plugs into the injector loom below the rocker cover. What has happened is that the plug has perished and the little clips won't hold the pins in anymore. Any Ideas????
Is this part of the main harness or can this be replaced separately? He's trying not to fork out for a new loom.
Stu
Master
there are a few of us in this position, mine are on there way out, but i think we are out of luck. hopefully someone can tell me otherwise.
Cheers from the Desert
Rexy
2000 130 TD5
Oil in the Harness, suspension knock, transmission clunk, engine oil leaks, exhaust manifold leaks, centrifugal oil filter stripped bolts, a/c leaks, door leaks, wouldn't trade it for the world
RoverLord
They snap when not treared REAL GENTLE,did it myself.
Ive used tie wire to secure it to the bolt on the rocker cover above it.Hasnt given any problems since.
Tell him to remove the ECU,next to battery,if there is oil leaking from it there is the issue,it causes missing and all sorts of problems!!!.ONLY LANDROVER CAN BUILD A COMPUTER THAT LEAKS OIL
If there is oil coming from the ORANGE connector you need to search "Oil In The Harness"
GOODLUCK
Andrew
DISCOVERY IS TO BE DISOWNED
Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
Snow White MY14 TDV6 D4
Alotta Fagina MY14 CAT 12M Motor Grader
2003 Stacer 525 Sea Master Sport
I made the 1 millionth AULRO post
Master
Yeah, Oil in the loom is not the problem as the internal loom has been replaced. Is the loom part of the body or can it be replaced separately?
He is currently thinking about getting a second hand loom and splicing a new plug on.
Stu
Wizard
Supporterthats what I ended up doing to mine getting a second hand loom and splicing the wires to the loom
disco seriesII mods so far:-bullbar,hyd winch,
detriot locker,lsd front,C.D.L kit,chipped and bigger intercooler,2" lift,rock sliders, lsd in transfer case, modified auto trans.
In the event of nuclear war,Disregard this message
Hi All
I replaced both looms 2 years ago took a few hours the hardest thing was feeding the loom behind the engine and connecting the glow plugs.
Regards
Doug
ForumSage
So there was no trouble "looming"?Originally Posted by DougLD
2005 Defender 110
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks