Reply With QuoteEr, don't mind me, just bumping this up to see if that helps!
ChatterBox
When I was pinching bits from a Stage I wreck I cut through the two master cylinder brake lines and forgot to note which pipe goes to what. Obviously one goes to the front and one to the back, but I'm not quite sure which is which. I'm changing from the old single-circuit system to dual, so I wouldn't mind getting it right!
If any Stage I owners could have a look I'd appreciate it. The pipes should go to the PDWA, mounted around the RH footwell. It's the thing that lights up the warning light should one of the two brake circuits fail. After that the lines will go to either the front or the back.
I did ask this on a Stage I forum and got some answers, (thanks again, Stirling!), but I really have to make sure before I start bolting things in.
At any given point in time, somewhere in the world someone is working on a Land-Rover.
ChatterBox
Er, don't mind me, just bumping this up to see if that helps!
At any given point in time, somewhere in the world someone is working on a Land-Rover.
ChatterBox
Davo its hard to see in the dark but this is what I saw
The front pipe from the master cylinder goes to the front inlet of the switch arrangement on the chassis and from what I can see the front outlet on the switch arrangement goes to the front brakes
Duane
ChatterBox
Yeah, that's what they said on another site. I just wanted to make sure.
Okay, thanks yet again, and I appreciate you going out at night for a look!
At any given point in time, somewhere in the world someone is working on a Land-Rover.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks