Results 1 to 5 of 5

Thread: Discovery series 1 clutch slave cylinder

  1. 9th December 2008, 01:07 PM #1
    martinozcmax's Avatar
    martinozcmax
    martinozcmax is offline Master
    Join Date
    Mar 2008
    Location
    Melbourne
    Posts
    572
    Total Downloaded
    0

    Discovery series 1 clutch slave cylinder

    I have a problem with my clutch. I am slowly leaking clutch fluid and although it worked fine after bleeding the clutch yesterday it's right on the bottom limit before I can change gear comforatbly.

    I think the salve cylinder is rooted and was going to try a repalcement this weekend. Does anyone know if the Td5 slave cylinder is the same as the Tdi ? I have a 93 Tdi and have been bitten before buying parts that don't fit.

    I found this one on fleabay and wanted someone cleverer that men to advise me before I wasted my hard earned.

    From the ad
    Clutch slave cylinder which fits TD5 Discovery & Defender models from 1998 to 2004.

    Part number FTC5202


    Thanks


    Martin
    Reply With Quote Reply With Quote
  2. 9th December 2008, 03:43 PM #2
    rick130's Avatar
    rick130
    rick130 is offline Moderator Gold Subscriber
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    Depends on your VIN, but being an LT77 I highly doubt it.
    AFAIK, only some 300Tdi's and all TD5's used that slave cyl. ie. R380 g/box, not your LT77.
    Reply With Quote Reply With Quote
  3. 9th December 2008, 03:47 PM #3
    martinozcmax's Avatar
    martinozcmax
    martinozcmax is offline Master
    Join Date
    Mar 2008
    Location
    Melbourne
    Posts
    572
    Total Downloaded
    0
    Thanks Rick, found a Tdi 200 one at a good price.
    Reply With Quote Reply With Quote
  4. 9th December 2008, 04:04 PM #4
    lokka Guest
    Just rebuild your original go to any brake and clutc mob and they should be able to supply u the bits to reco it allit will need is a new cup seal last time i did one i got enough seals to reco mine 5 times over for $20
    Reply With Quote Reply With Quote
  5. 9th December 2008, 04:10 PM #5
    abaddonxi's Avatar
    abaddonxi
    abaddonxi is offline Moderator
    Join Date
    Jan 1970
    Location
    2780
    Posts
    8,257
    Total Downloaded
    0
    Remember not to pull the slave pushrod out with the cylinder when you do it.

    G'wan, ask me how I know.

    I think it's something like undo the slave cylinder bolts, hold it in place, get someone to depress the clutch pedal while you hold onto the cylinder and push the cylinder off the pushrod.

    There's a tutorial with pictures on LR4x4 tech archive

    300TDi Disco clutch slave - LR4x4 - The Land Rover Forum

    Clutch Slave Cylinder replacement - LR4x4 - The Land Rover Forum

    Simon
    Reply With Quote Reply With Quote
« Penrite ATF "SIN".... anyone used it ? | Procomp Xtreme Mud terrain »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!