Pic as req.Quote:
Originally Posted by long stroke
Message - AULRO Photo Gallery
Message - AULRO Photo Gallery
Message - AULRO Photo Gallery
I still can't post pics????????????????????:twisted:
Printable View
Pic as req.Quote:
Originally Posted by long stroke
Message - AULRO Photo Gallery
Message - AULRO Photo Gallery
Message - AULRO Photo Gallery
I still can't post pics????????????????????:twisted:
Sweeet, very nice thanks Hook, they don't look to hard to make;)Quote:
Originally Posted by hook
These pics just may come in handy soon:)
CHEERS TIM.
The mounting plate is about 6mm plate.
Not needed forward of the A pillar.
Maybe able to do with out the spacer, forward of the A pillar.
Primer on the blue RHS is were bends were made to follow sill lines.
The middle cut was made with two hacksaw blades and the front one with 3 blades. (check air pressure before welding to spacing RHS), I didn’t, I had to cut it of and re-weld one air tank, then back onto spacer .
As for, air fittings, top one is for hose fitting and the bottom is for pressure release and water drain.
If done again I would put in more air fittings.