Thread: Locker question....?

County could have the old imperial size carrier bearings, in which case it won't fit.

But you could fit the disco 3rd member with locker - if it still has the rubber donut, you would need to replace the pinion flange (but I don't think anyone would fit a locker and not ditch the donut).

Thanks John!!!

Originally Posted by Bush65

County could have the old imperial size carrier bearings, in which case it won't fit.

But you could fit the disco 3rd member with locker - if it still has the rubber donut, you would need to replace the pinion flange (but I don't think anyone would fit a locker and not ditch the donut).

didnt the Rear donut start from 95 eg 24 spline???????

Originally Posted by Bush65

County could have the old imperial size carrier bearings, in which case it won't fit.

But you could fit the disco 3rd member with locker - if it still has the rubber donut, you would need to replace the pinion flange (but I don't think anyone would fit a locker and not ditch the donut).

I thought the bearing was the same in all rover 3rd members, but with a different ID for the early hemispheres??? If so then you could bring it across.

Or is this incorrect?

Thanks guys!!
But does anyone know for shore?

I think the answer is no Tim

I 'think' you could change the flange and swap the entire diff pumpkin and locker.

There is only from memory 1 10 spline ARB locker so I think it could work.

Not certain tho.

Rgds
Pete.

Originally Posted by long stroke

Hi all
Just asking if a disco1 10 spline rear locker will fit into a county front 10spline???

Thanks in advance!!

TIM.

yes it will fit fine,

both will be metric diffs,

Dave

I'm confused