Thread: Front Diff Centre Change

Yes, a little heavy and awkyard, but very doable

When I do this, I put in new seals at the axle join, as you tend to monster them on the way out.
Regards Philip A

thats how I do it djam...

i also put down some smooth board (like a piece of laminate or table top) put some cardboard on top of that with a slather of grease between them.

slide it under the wheel and then you can jsut slide the whole thing out, you only have to come out about 4 inches to free the diff.

Originally Posted by djam1

Guys
I have to change the diff centre in the front of my Stage 1 (found Military 4 Pinion).
Does anyone know if I can just undo the bolts on the swivels pull the axles from the centre pull the centre then reverse the process??
Trying to avoid pulling the brakes and swivels apart

Thanks

Dont suppose you happen to know where there is another of those 4 pinion military diff centres. I would be interested if you know of another....Regards..Brian

Thanks for your advice Guys
Bearman Sorry to say I dont if you ring All 4x4 Spares in Newcastle they may have another but I dont think so??

Yeah, as said quite possible we did it about twice today

TIM.