-
2nd February 2009, 01:01 PM
#1
3.5 RRC Elec Dizzy System.
Hey guys got a strange one here can any give more info regarding the electronic dizzy setup on a 3.5 RRC carby engine its the one with the two wires coming out of it and running to the coil control under the coil.
The main info I am after is whether its a reluctor pickup, optical, halls gap.
Also if the coil fires on the negative or positive edge. E.g it fires when the signal from the dizzy goes high or low. I don't want to give away to much info about what I am up to till I get this figured out.
If anyone can point me in the right direction of a website or has the info on hand it would be greatly appreciated.
Regards Kris
-
2nd February 2009, 07:52 PM
#2
ha mate got spark problems as well, I am about to try and wire up a second hand MSD 6AL multi spark unit, let us in on what you doin. the elec dizzy is a magnetic pick up type I think.
-
2nd February 2009, 09:30 PM
#3
Will look at mine 4 u tomorrow
Just got home from callout so I am happy to look at my setup in 76 model.
Can take some pics if u need me too.
Finish work and home usually b4 six pm.
Unless u get the answers somewere or off someone sooner.
cheers
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks