Thread: What is this plug for?

I don't know ... But arn't the coolant expansion bottles on the D1, located in that area?

Mike

They are.

So is mine, you can see the retaining bracket for it in shot. I have the bottle out getting an extra fitting soldered in for the bottom hose.

At the very bottom of the pic you can see two green wires, they are for the low coolant sensor (factory fitted to RR).

Originally Posted by BigJon

They are.

At the very bottom of the pic you can see two green wires, they are for the low coolant sensor (factory fitted to RR).

Yea ... I saw that bracket ...

Have you had a hunt for a JPG of someones motor bay?
Also ... What are the "wire colour code" going to that plug? (I can see that they are white?)

Mike

Jon,

I searched RAVE ETM for SY (grey/yellow), comes up evaporative emission canister purge valve.

Should be the thing if the other wire is WP (white/purple).

HTH

Pete

Magnetic clutch control for the supercharger????....Solenoids for the nitrous???

Originally Posted by Pierre

Jon,

I searched RAVE ETM for SY (grey/yellow), comes up evaporative emission canister purge valve.

Should be the thing if the other wire is WP (white/purple).

HTH

Pete

Sounds about right and is in the right area.
Won't be using that then .

Charcol canister......

Hey... ask me any questions as i remember what i pulled out...

Might have a 98 model to use as a guide this week....

Steve,

I don't suppose you have got the charcoal canister lying around you can post to me?