Clutch Part

**Jock The Rock** · 25th March 2009, 05:05 PM

Gday

I have a 300 Tdi Defender. Im losing clutch fluid and it appears to be dripping down the firewall and onto the floor mat just below the clutch pedal

I asked JC about it over the phone and he told me the part I needed but that was a a week or so ago and I cant for the life of me remember what it was called

Could someone tell me what I need please?

Thanks

**JDNSW** · 25th March 2009, 05:27 PM

Clutch master cylinder!

John

**justinc** · 25th March 2009, 06:27 PM

Jock, trailer master cylinder, 3/4" bore, most trailer shops etc have them for up to $45 or so.

JC

**Jock The Rock** · 25th March 2009, 06:39 PM

Originally Posted by justinc

Jock, trailer master cylinder, 3/4" bore, most trailer shops etc have them for up to $45 or so.

JC

Thanks JC

Ill get one tomorrow

**JDNSW** · 25th March 2009, 07:42 PM

Originally Posted by Jock The Rock

Thanks JC

Ill get one tomorrow

You will have to swap the pushrod for the one in your old cylinder - just a matter of removing the rubber boot and then the circlip to do that. Just be very careful not to get any dirt in and particularly not any oil or grease except rubber grease.

wash your hands before doing this as they are sure to be a bit greasy from getting the old cylinder out.

There is a detailed description of how to change the cylinder in one of the issues of the AULROVIAN I think.

John

**Jock The Rock** · 25th March 2009, 07:45 PM

Originally Posted by JDNSW

You will have to swap the pushrod for the one in your old cylinder - just a matter of removing the rubber boot and then the circlip to do that. Just be very careful not to get any dirt in and particularly not any oil or grease except rubber grease.

wash your hands before doing this as they are sure to be a bit greasy from getting the old cylinder out.

There is a detailed description of how to change the cylinder in one of the issues of the AULROVIAN I think.

John

Ive got my hands on a Haynes Manual so hopefully that will help me out

Thanks for the advice

**JDNSW** · 25th March 2009, 07:50 PM

Originally Posted by Jock The Rock

Ive got my hands on a Haynes Manual so hopefully that will help me out

Thanks for the advice

Pretty much the same description.

John

shad · 26th March 2009, 01:27 PM

where did you get the manuel if you dont mind me asking sounds like a good thing

**Jock The Rock** · 26th March 2009, 03:06 PM

Originally Posted by shad

where did you get the manuel if you dont mind me asking sounds like a good thing

I got mine off eBay fairly cheap.

Something like this

Haynes Manual for Land Rover 90, 110 & Defender - eBay Land Rover Workshop Manuals, Land Rover, Car Manuals Literature, Cars, Parts Vehicles. (end time 03-Apr-09 09:41:15 AEDST)

Ones for other Landy Models

haynes manual land rover items at low prices on eBay.com.au

Thread: Clutch Part

Thread Tools

Clutch Part

manuel

Bookmarks

Bookmarks

Posting Permissions