Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Auto guru to uprate ZF 4hp22 in Sydney?

  1. #1
    up2nogood Guest

    Auto guru to uprate ZF 4hp22 in Sydney?

    Just tossing it behind a 4.6 and figured I didn't really want to pull it out again and it is old.....

    Anyone know of a transmission specialist in Sydney who can put the 4hp24 clutch packs in and do a service/rebuild without ballsing it up? Was going to send it to ZF, haven't spoken to them yet.

  2. #2
    Join Date
    Dec 2006
    Location
    NSW , Pennant Hills
    Posts
    3,477
    Total Downloaded
    0
    Quote Originally Posted by up2nogood View Post
    Just tossing it behind a 4.6 and figured I didn't really want to pull it out again and it is old.....

    Anyone know of a transmission specialist in Sydney who can put the 4hp24 clutch packs in and do a service/rebuild without ballsing it up? Was going to send it to ZF, haven't spoken to them yet.
    Hey Mate;

    AFAIK , ZF only carry out a Standard Rebuild , another words they replace worn parts with OME parts. not sure if they put in heavy duty clutch pack out of a 4hp24 , assuming your existing one is 4hp22.

  3. #3
    up2nogood Guest
    Yep, existing is 4HP22.

    So we need a guru then!

  4. #4
    Join Date
    Jan 1970
    Location
    Yass NSW
    Posts
    7,239
    Total Downloaded
    0
    I know a guy in Canberra.

  5. #5
    Join Date
    May 2006
    Location
    Woolgoolga
    Posts
    7,870
    Total Downloaded
    0
    Manuels in Thomastown, Vic. ZF specialists

    Manuel Automatics Pty Ltd

    353 Settlement Rd Thomastown VIC 3074
    ph: (03) 9466 4499

  6. #6
    dans Guest

    ZF rebuild

    Just out of interest.... who do you recommend in Canberra? My ZF went a bit erratic and one guy told me i needed to spend around $5k fixing it. However, after a service it has been fine so far for around another 30 to 40 thousand k's. But would rather take it to someone who knows for next service.

    Dan

  7. #7
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,031
    Total Downloaded
    0
    Quote Originally Posted by George130 View Post
    I know a guy in Canberra.
    Hey Ed

    did you ever post a list of gearbox mods?

    or did you have to sign a non-disclosure?
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!


    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]

  8. #8
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    14,147
    Total Downloaded
    99.87 MB
    When I had mine packed with all of the 4HP24 parts I had AMV do it and they sent it off somewhere, but just about everybody said that A&B transmissions (???) in Melbourne to do it. Apparently they are the guru's outside of ZF in Germany and ZF sends people there for training on the ZF transmissions.
    Cheers
    Slunnie


    ~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~

  9. #9
    Join Date
    Jan 1970
    Location
    Yass NSW
    Posts
    7,239
    Total Downloaded
    0
    Quote Originally Posted by Pedro_The_Swift View Post
    Hey Ed

    did you ever post a list of gearbox mods?

    or did you have to sign a non-disclosure?
    I don't know half of the work done.
    I do know that the new clutch packs have extra meat on them and there are more plates than in a standard box. Valve sprigs are heavier to.
    It now has a custom oil pickup in the sump.
    Since it was done at mates rates it was a case of only listing some of the work on the bill.
    I did get a load of bits back for my amusement.

  10. #10
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    Id take your auto to georges guy....

    (hes had enough practice by now)
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!