Reply With QuoteI cannot see any reason why it should not be a straight fit. It is the same unit, as far as I know the transfer box has another suffix, that's about it. Good luck, mate!
Master
Gday,
Just wondering if a R380/LT230 from a 1997 300TDI would fit into a 1994 300TDI (with a broke R380/LT230), with no mods or anything?
If so, how does the gear ratios and all that jazz go?
Any other problems with it?
Regards
Matt
Wizard
SubscriberI cannot see any reason why it should not be a straight fit. It is the same unit, as far as I know the transfer box has another suffix, that's about it. Good luck, mate!
Johannes
There are people who spend all weekend cleaning the car.
And there are people who drive Discovery.
Should be just a strait swap. 300 to 300 should be same gear ratios. I just finished putting r380 into my 200tdi replacing the very stuffed lt77 with only very minimal mods. Are you sure yours is an R380 not lt77?
LordRover
SupporterHe has a 300 Tdi and these only had an R380 - the LT77 was only on the 200TDi, 3.5V8 and early fan belt 3.9V8.Originally Posted by disco1
Garry
REMLR 243
2007 Range Rover Sport TDV6
1977 FC 101
1976 Jaguar XJ12C
1973 Haflinger AP700
1971 Jaguar V12 E-Type Series 3 Roadster
1957 Series 1 88"
1957 Series 1 88" Station Wagon
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks