-
21st April 2009, 06:58 PM
#1
D1 Rear springs into D2 front
Was talking to a mate today that said D1 rear springs will fit the front of a D2 and give about a 2" lift.
Can anyone confirm or dispell this?
-
21st April 2009, 07:19 PM
#2
Yes it will.... i have done it to Wardy's D2
-
21st April 2009, 07:24 PM
#3
You will also need to change the lower spring perch to a flat bottomed one. BTW, you can also use D2 and RRC rears also.
Cheers
Slunnie
~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~
-
21st April 2009, 07:29 PM
#4
-
21st April 2009, 07:34 PM
#5
Actually, when you change the lower perch, the D2 ones will sit higher than the D1 ones. IIRC the difference is 10mm or 1/2" or similar.
Cheers
Slunnie
~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks