OK - $60 and a new grinder sorted it, noise is still there on left turns though, so I guess the diff is knackered then? Time to trade her in.
Tried to replace the front wheel bearing. Got the new bearing in to the hub ok, but its left half the inner bearing on the drive flange. Cannot for the life of me get it off.
Car is half in the garage so cannot lock up.
Its a freelander.
Anyone near Glenwood (nsw) got a bearing separator? in the next hour?
Ill be walking to bunnings at this rate.
OK - $60 and a new grinder sorted it, noise is still there on left turns though, so I guess the diff is knackered then? Time to trade her in.
could it not be your swivels?
Our Land Rover does not leak oil! it just marks its territory.......
were the noise coiming from front or rear may be cv joint, not sure freelanders have swivels, go ask in tech section or freelander section plenty of knowledge there
ian
bugger that's what I ment CV.....not swivel couldn't think of the word.
That makes me look pretty dumb....
There is a way of checking your cv......I think you put the car on full lock and have someone listening for knocking
Our Land Rover does not leak oil! it just marks its territory.......
Thanks. Its not the CV's I have swapped them left to right, noise is still on left hand turns only. It's coming from the front possible from the right or center of the car.
Can you explain the noise?
Our Land Rover does not leak oil! it just marks its territory.......
grinding/chattering
its probably the centre differential unit or whatever they call it on the freeloaders......
they are known to play up........
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks