Thread: ZF Auto

Originally Posted by Rangier Rover

Just thinking your going to have to make some ramps off that driveway of yours to do this as pulling a transmision out at 30 deg may be awkward. Or trailer it up here and do it on a slab with a quad lifter I don't have a hoist other than a front end loader or two You may have to clear some space in my shed 1st though

Tony

well , seeing I'm coming up to your place very soon hopefuly (when you've decided it's suitable ) , how about I start clearing out that shed of your first to make some room for project 89 .

Originally Posted by Disco_owner

well , seeing I'm coming up to your place very soon hopefuly (when you've decided it's suitable ) , how about I start clearing out that shed of your first to make some room for project 89 .

Sounds good to me. I just need to get the 40 series cruiser finished that is in the way about 6hrs work in it. Move the series 1 and kids Dak Dak for latter. A few engines and gear boxes etc. Sweep it out and life's good
Hope we get some good rain here soon so not feeding stock full time


Tony

My ZF was largely a mystery - especially when the car had 240000k on it before it got to me... "It is supposed to change at these revs"... "why does it lock up now"..." is any of this normal"... An no other D2 experience to compare it against.

So two notes of thanks:
First to all those who post useful info about their ZFs. It has helped a heap.
Second - to A and B Automatic Transmissions who checked mine today. Change points and lock ups are all where they ought to be.
What they DID find was a leaking rear seal. Good to know!

Lesson - check early -check often... !

Originally Posted by Disco_owner

Simon ,

I know this is been asked before , any idea who does this work in Sydney ? and at what cost if I drop the Auto box myself and take it to them ?

Hi Khos

ZF Australia

Address: 14 Lidco St, Arndell Park NSW 2148

Phone (02) 9679 5555

Ask for Theo

Baz