Drain and refill diff oil.
Check for contamination again in a week.
Same for swivel / wheel bearing lube.
Gday all,
Well I was doing a few deep water crossings last week and have just descovered a bit of a problem. My front diff breather pipe became disconnected during one of the crossings and the diff oil is now a light brown foam. I had driven it a few times before I discovered the problem and dropped the oil this morning. I have free wheeling hubs so only a couple of kilometers driving was done with the diff in motion. What is the best course of action to replenish the oil and clean out the diff? should I also drop the oil out of the swivel hubs and check wheel bearings as well? Vehicle is a LWB SIII
Thanks in advance
Paul
Drain and refill diff oil.
Check for contamination again in a week.
Same for swivel / wheel bearing lube.
Yes. Same as BigJon. Drain, refill both diffs and swivels and drive round for a week, preferably with the hubs engaged, then check and expect to change again.
John
John
JDNSW
1986 110 County 3.9 diesel
1970 2a 109 2.25 petrol
Ok thanks for the info, I will check the bearings and refill the oil in the morning.
Cheers
Paul
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks