Results 1 to 3 of 3

Thread: 200 tdi injector pump

  1. #1
    Join Date
    May 2007
    Location
    melbourne
    Posts
    66
    Total Downloaded
    0

    Thumbs up 200 tdi injector pump

    hi guys and gals
    Ive just resently pulled down my 200 tdi and had it all machined ready for a rebuild but realised the other day when i was reading my workshop manual that when you remove your inector pump your suppose to lock it some how before you remove it , and i didnt now if i accidently turned my pump while it was out how can i tell when and if its set right with timing of crankshaft and cam . thank you any help would be appreciated as im ready to rebuild the engine .

    Andy

  2. #2
    Join Date
    Jan 1970
    Location
    Blairgowrie, Vic
    Posts
    1,106
    Total Downloaded
    0
    Andy, have you got the RAVE manual? It's worth the $20! I haven't had any problems setting up a 300Tdi pump, and it would be the same as 200Tdi.

    But I did it with help of the manual. It involves some locking pins on the engine and pump, and as long as the engine has been "parked" at #1 TDC, the remaining installation of the rest is then a breeze.

    Get the CD off the AULRO shop.

    Pete
    Last edited by Pierre; 7th June 2009 at 08:59 AM. Reason: Too many 3s
    Dizzie, 08 D3 TDV6 SE

  3. #3
    Join Date
    May 2007
    Location
    melbourne
    Posts
    66
    Total Downloaded
    0

    thanx matey

    will look into it now thanx for the advice


    Andy

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!