Results 1 to 3 of 3

Thread: Wheel compatibility between landys and Rovers?

  1. #1
    Join Date
    Jun 2009
    Location
    Blue MTNs
    Posts
    226
    Total Downloaded
    0

    Wheel compatibility between landys and Rovers?

    So sorry if this has been well covered, and pardon my ignorance for my wheely noob question..
    But from series I through to Disco 3s and everything in between, including Range Rovers. What has the same stud patterns, and what are the offset differences.
    I have a seriesIII and a Disco 2, and wanted to get some new wheels for both. What's the difference between my Disco and series? Can the Disco wheels go on the series? Also asking for all the specs so I can shop for both cars, and also curious for future and others reference.
    If this has been done to death, could someone please direct me to a thread with it all in it.
    thanks in advance.

  2. #2
    Join Date
    Sep 2007
    Location
    Gold Coast
    Posts
    6,078
    Total Downloaded
    0
    There are a few thread on this,

    But basically with regards to stud pattern and pcd's

    Series - Defender - Disco1 - RRC are the same

    P38 - Disco2 - and I assume D3 and l322 are the same (or near enough - may need a centralising ring)

  3. #3
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    14,145
    Total Downloaded
    99.87 MB
    The D2 and P38 are the same, but different to the RRS, D3 etc. The RRS pattern can be made to fit a D2/P38, but not the other way around.

    Freelanders are on their own.


    All of these tyres are 5x120 PCD, but vary in the other parts of the mounting such as nuts, studs, centralising hubs and slightly by offset.
    Cheers
    Slunnie


    ~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!