Results 1 to 6 of 6

Thread: Nanocom & D2 suspension change

  1. 28th July 2009, 10:51 AM #1
    MickS Guest

    Nanocom & D2 suspension change

    Can a nanocom be used to change the suspension settings on a D2 - from bags to coils?

    Cheers
    Reply With Quote Reply With Quote
  2. 28th July 2009, 10:57 AM #2
    Psimpson7's Avatar
    Psimpson7
    Psimpson7 is offline TopicToaster
    Join Date
    Sep 2007
    Location
    Gold Coast
    Posts
    6,078
    Total Downloaded
    0
    I am 99% sure it can.
    Reply With Quote Reply With Quote
  3. 28th July 2009, 11:16 AM #3
    discowhite's Avatar
    discowhite
    discowhite is offline TopicToaster
    Join Date
    Jan 1970
    Location
    Padstow NSW
    Posts
    4,501
    Total Downloaded
    0
    im 99% sure also.

    cheers phil
    Reply With Quote Reply With Quote
  4. 28th July 2009, 11:53 AM #4
    gazk's Avatar
    gazk
    gazk is offline Master
    Join Date
    Dec 2007
    Location
    Cambewarra, NSW
    Posts
    517
    Total Downloaded
    0
    Under the BCU settings you can set whether the vehicle has SLS fitted or not.
    Reply With Quote Reply With Quote
  5. 28th July 2009, 12:15 PM #5
    Bytemrk's Avatar
    Bytemrk
    Bytemrk is offline ForumSage Silver Subscriber
    Join Date
    Oct 2003
    Location
    Montrose, Vic.
    Posts
    5,417
    Total Downloaded
    0
    Yes, 5 minute job

    It's actually in the Disco ABS SLS section under settings.

    Read your existing settings .. it will say Air, simply change it to Coil and write settings.... done.



    Cheers,
    Mark
    Mark

    Of all the things I've lost, I miss my mind the most

    2015 TDV6 D4.... the latest project... Llams, Traxide, Icom 455, Tuffant Kimberleys and Mofos.... so far.
    2012 SDV6 SE D4 with some stuff... gone...
    2003 D2a TD5...gone...
    2000 D2 V8...gone...
    https://bymark.photography

    Reply With Quote Reply With Quote
  6. 28th July 2009, 12:55 PM #6
    pohm66's Avatar
    pohm66
    pohm66 is offline Master
    Join Date
    Nov 2007
    Location
    Brisbane
    Posts
    395
    Total Downloaded
    0
    Yep, did this to Grimmy.

    Just worth noting that in my case the nanocom numbers didn't relate directly to mm heights so basically used a jack to raise the distance between the bump stops and saved that point. Did a 30mm lift over standard to match the new springs at the front.
    New :- D3 TDV6 2006 SE
    Bullbar, traxide dual battery
    General grabber ATs
    Mitch hitch
    Home made drawer and fridge system
    Foldable UHF antenna on roof rail
    Reply With Quote Reply With Quote
« DII TD5 breakdown | D3 TOW HITCH »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!