Results 1 to 5 of 5

Thread: a-frame and rear x-member question??

  1. 23rd August 2009, 07:59 PM #1
    RRV80's Avatar
    RRV80
    RRV80 is offline Master
    Join Date
    Sep 2006
    Location
    Sunny Coast QLD
    Posts
    219
    Total Downloaded
    0

    a-frame and rear x-member question??

    Up until what year did the D1's and classic RR's have the square rear crossmember, or more importantly, the ones that had the a-frame to chassis mounts bolted on with three or so bolts on each side rather than welded like on the models fitted with the round rear x-member.

    I know it isn't the right place to ask this, but, I need to get the two bolt-on mounts from the chassis to the a-frame, the two a-frame arms and the part at the diff end that the balljoint goes into prefably without the bracket for the boge self leveller. Not fussed on the condition of the bushes and balljoint as they will be replaced anyway. And i also need two lower control amms - also not fussed on the condition of the bushes but they will need to be straight of course.
    Reply With Quote Reply With Quote
  2. 23rd August 2009, 11:36 PM #2
    Waxenwane's Avatar
    Waxenwane
    Waxenwane is offline Master
    Join Date
    Mar 2007
    Location
    Seaford, Near Franganistan, Victoria
    Posts
    388
    Total Downloaded
    0
    What I do know is that '86 Rangies still have the box and '93 Disco's dont, someone else?
    I can help you with the gear you want though.
    0415850907
    Reply With Quote Reply With Quote
  3. 24th August 2009, 12:12 AM #3
    GuyG's Avatar
    GuyG
    GuyG is offline ChatterBox Silver Subscriber
    Join Date
    Jan 1970
    Location
    Brisbane
    Posts
    2,001
    Total Downloaded
    0
    The cross member that your chasing is that the one behind the fuel tank, if so we have one. I'm assuming by lower control arms, you're referring the the trailing arms?? that go between the chassis and the rear diff - these vary depending on which year model they are going into.

    PM me your details as I'm fairly sure we have what you're chasing regarding the a-frame setup - I'm in Brisbane
    98 Harvey the tractor - 300 tdi Defender Wagon
    84 Alfetta GTV
    Reply With Quote Reply With Quote
  4. 24th August 2009, 07:16 AM #4
    Bush65
    Bush65 is offline YarnMaster
    Join Date
    Jan 1970
    Location
    'The Creek' Captain Creek, QLD
    Posts
    3,724
    Total Downloaded
    0
    Quote Originally Posted by GuyG View Post
    The cross member that your chasing is that the one behind the fuel tank, if so we have one. ...
    No it is the cross member in front of the rear diff, behind the transfer case, below rear passenger seat.

    I could help with parts but you should be able to find plenty closer to where you are.
    Reply With Quote Reply With Quote
  5. 26th August 2009, 02:08 PM #5
    Grimace's Avatar
    Grimace
    Grimace is offline YarnMaster Silver Subscriber
    Join Date
    Jan 1970
    Location
    Gold Coast, QLD
    Posts
    3,570
    Total Downloaded
    0
    1990 is the beginning of the round crossmember (in classic rangies)

    I have the upper bolt on brackets and the arms available.
    I also have a ball joint mount that has had the doodle for the load leveler oxyd off (not very neat).

    I am on the gold coast, if your interested in any of the above shoot me a pm.

    Cheers
    Grimace
    I rule!!!

    2.4" of Pure FURY!!!
    Reply With Quote Reply With Quote
« D2 Recovery points | Engine light intermittantly comes on.. »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!