Thread: air con remove hose under dash

In the absence of others - I presume that it's a CA VIN series - ie the first with the horizontal grille. If it has aftermarket air, either fitted new or later, somewhere under the insulation you'll find some sort of compression fitting that you undo. ( flare nut type) For factory, it says that the connectors are at the back of the assembly where you can't see it. The manual shows that the top of the dash (the bit that sits where the instrument pod would be if it was LHD) has to come off to remove the evaporator matrix. Of course it could be anywhere, but thats the gist of it.

Be wary of pressure if the ac used to work beforehand.