Results 1 to 4 of 4

Thread: D2 front brake dust seals

  1. 18th January 2010, 04:21 PM #1
    IanP
    IanP is offline Master
    Join Date
    Apr 2008
    Location
    Ferny Creek (Dandenong Ranges) Melbourne
    Posts
    146
    Total Downloaded
    0

    D2 front brake dust seals

    Sunday I replaced the front rotors and and pads on the D2, no dramas except the I noticed that the dust seal/boot on one of the pistons needs replacing.

    I tried the usual suppliers and the seals/boots come as part of a 'rebuild kit', which I do not need at this time as everything is in pretty good nick (more or less).

    Does anyone know where the boots can be sourced from without buying the full kit? If there is no alternative, I will just have to bite the bullet and get two kits and put the unused parts on the shelf for when I do need them.

    Cheers
    Ian
    Reply With Quote Reply With Quote
  2. 18th January 2010, 10:37 PM #2
    350RRC's Avatar
    350RRC
    350RRC is offline ForumSage Silver Subscriber
    Join Date
    Mar 2008
    Location
    Bellarine Peninsula, Brackistan
    Posts
    5,502
    Total Downloaded
    0
    Get a kit from Paddocks for less than 8 quid, don't know if it's for one caliper or two.

    Easiest way is to call them and order during UK office hours. Be here in a week.

    STC1919 Front Caliper Piston Seal Kit - to 2A999999

    cheers, DL
    Reply With Quote Reply With Quote
  3. 19th January 2010, 10:21 AM #3
    Skellz Guest
    What did it cost you to do you rotors and pads and were did you get it all from

    Reply With Quote Reply With Quote
  4. 19th January 2010, 12:01 PM #4
    IanP
    IanP is offline Master
    Join Date
    Apr 2008
    Location
    Ferny Creek (Dandenong Ranges) Melbourne
    Posts
    146
    Total Downloaded
    0
    Pads $63 per set (Bendix), front rotors $45 each (non genuine). I have a trade account with Bursons. To get the old rotors machined would have cost $45-$60, so I am inclined to just replace with new rather than trying to eek out a few extra K's from the rotors.
    Reply With Quote Reply With Quote
« DO I NEED TO REMOVE THE STARTER MOTOR | Machine Work Required Melbourne Central »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!