Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: help

  1. #1
    clean32 is offline AULRO Holiday Reward Points Winner!
    Join Date
    Mar 2008
    Location
    SA, Newton
    Posts
    2,104
    Total Downloaded
    0

    help

    Help have misplaced my Mud map from when I pulled the dash out

    if some one could help out and grab a screw driver and pull out the rectangular lights from there dash and check the wiring colors for me please

    I have all the gages etc its the bit with the ignition, center diflock light


    Apart from the 2 clip-on fittings there are a few spade fittings arranged like so

    Looking from the wheel

    =....................... =
    = ........=............ =


    i just need to know what color goes where

    thanks in advance

  2. #2
    Join Date
    Jul 2006
    Location
    Cairns, FNQ
    Posts
    647
    Total Downloaded
    0
    Ha ha, thats only a combination of five lugs, might take a while using trial and error!, sorry, can't help, too dark here. If you've got the oil pressure light, you should be right!.

  3. #3
    clean32 is offline AULRO Holiday Reward Points Winner!
    Join Date
    Mar 2008
    Location
    SA, Newton
    Posts
    2,104
    Total Downloaded
    0
    10 actualy

  4. #4
    Join Date
    Jul 2006
    Location
    Cairns, FNQ
    Posts
    647
    Total Downloaded
    0
    Lucky you're not in a hurry then.

  5. #5
    clean32 is offline AULRO Holiday Reward Points Winner!
    Join Date
    Mar 2008
    Location
    SA, Newton
    Posts
    2,104
    Total Downloaded
    0
    im sitting here with the county a non runner at the moment and thinking about how many time i have come to the rescue of other landy owners just since Xmas. im a mug

  6. #6
    Join Date
    Feb 2008
    Location
    Adelaide Hills
    Posts
    221
    Total Downloaded
    0
    give me a call

  7. #7
    Join Date
    Jan 1970
    Location
    'The Creek' Captain Creek, QLD
    Posts
    3,724
    Total Downloaded
    0
    Sorry I can't help, except for some pages from a workshop manual attached below - don't know if Isuzu County is different.

    I'm using a 110 chassis, with a rangie firewall and dash. I don't have a 110 dash that I can check.
    Attached Files Attached Files

  8. #8
    Join Date
    Nov 2007
    Location
    somewhere between QLD and WA
    Posts
    81
    Total Downloaded
    0
    Do you have the 3.9 wiring diagram from the Australian supplement? IF not, PM your email address and I'll send it.
    RR.

  9. #9
    clean32 is offline AULRO Holiday Reward Points Winner!
    Join Date
    Mar 2008
    Location
    SA, Newton
    Posts
    2,104
    Total Downloaded
    0
    Thanks guys

    Yes the wiring differs enough to get you in the poo between models and there seems to be a change between 85-86 as well for the Isuzu’s
    So wiring diagrams are a bit limited in some respects.
    Amp meter, if its shown on the diagram? may be feed by a white wire from the alt ( V8) or a green wire from the fuse block.
    The Isuzu supplement shows dash lights as RW where in reality they are WR add to the 10 zillion earth wires.

    As well as 25 years of other peoples work.

    Anyway i have ripped it all out again and am making up a short loom for just the dash pod feeing into 1 connecting block.

    I do how ever need a mud map for the combined light panel if any one could be so kind.

  10. #10
    Join Date
    Jul 2006
    Location
    Cairns, FNQ
    Posts
    647
    Total Downloaded
    0

    Cool

    I'd like to help, but I'm sure there's someone closer, plus I've got a killer hangover. Much prefer your new avatar!

Page 1 of 3 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!