Thread: no boge unit and no sway bars, what should i do ?

Originally Posted by stumpy

where did you get the A arm ball joint ?

well you can get all bushes on EBay etc

top of this page there is some outfits who advertise there.

your landrover dealer

etc

Aside from the roll etc issue, which the Boge will not affect, be aware that a Boge will work best with standard height springs, and do almost nothing with a 4inch lift.
The idea of a Boge is to allow a soft ride from soft rated standard height springs, by keeping the rear up to standard height with a load in.
Regards Philip A

Originally Posted by PhilipA

Aside from the roll etc issue, which the Boge will not affect, be aware that a Boge will work best with standard height springs, and do almost nothing with a 4inch lift.
The idea of a Boge is to allow a soft ride from soft rated standard height springs, by keeping the rear up to standard height with a load in.
Regards Philip A

what he said and thay are brilliant

i also did get new springs, bushes and shocks... but probly the wrong kind of shocks........ hahaha a i sure have ( put my hand into my pocket)

allright, i wont look into get a boge shock then, thanks philip, i'll get a new a arm ball joint though, and see if it stops the axles rock. cheers

Can you measure the wire diameter of the rear coils?

it 18mm wire thickness, there a dobsons 4'' spring

Originally Posted by stumpy

it 18mm wire thickness, there a dobsons 4'' spring

They look like DOBINSONS springs to me.