LT95 Bellhousing bolt torque

**steveG** · 1st February 2011, 10:21 AM

Is there a particular torque for the bellhousing to gearbox bolts (LT95).

The RRC manual that I'm working from for the gearbox rebuild just says "fit the bolts" so I'm guessing just standard torques for the bolt size.

Just wondering if there was anything special if its behind an Isuzu (given the extra rattle/torque factor).

Steve

**Bearman** · 1st February 2011, 12:03 PM

Originally Posted by steveG

Is there a particular torque for the bellhousing to gearbox bolts (LT95).

The RRC manual that I'm working from for the gearbox rebuild just says "fit the bolts" so I'm guessing just standard torques for the bolt size.

Just wondering if there was anything special if its behind an Isuzu (given the extra rattle/torque factor).

Steve

70lb/ft or 95nm for the small ones
120lb/t or 163nm for the large ones

**steveG** · 1st February 2011, 12:37 PM

Thanks Brian. Is that out of the army manual?
Definitely need to get hold of one of those as they seem to have all the useful info....

Steve

Thread: LT95 Bellhousing bolt torque

Thread Tools

LT95 Bellhousing bolt torque

Bookmarks

Bookmarks

Posting Permissions