Questions questions questions...

I think that pic includes the Isuzu bell housing. (Not Land Rover 4bd1 bell housing).

With a quick measure in the shed I would say 921 = front of water pump pulley to end of Isuzu bell housing.

If I measure from the front of water pump pulley to fly wheel housing (where bell housing bolts up), it is 700mm. The fixed fan at the front is 60mm extra.

Landy bell housing is too hard to measure from engine bay and it's too cold to be lying on concrete tonight. ;) Plus surely the length of the Landy 4bd1 bell housing is around here somewhere....

Note I could be out by a few mm as well... It was a tape measure eye ball job. :)

Quote:

---

Originally Posted by bacicat

Thanks guys - found this in that thread.

A quick question. On the right pic - showing the length - is that showing it includes the bell housing, or is that the flywheel housing? I can't quite work out what it is supposed to be.

https://www.aulro.com/afvb/images/im...14/05/1203.jpg

---

That may be the adapter plate. Want to have a close look at one, say, Thursday or Friday?

Quote:

---

Originally Posted by Judo

I think that pic includes the Isuzu bell housing. (Not Land Rover 4bd1 bell housing).

With a quick measure in the shed I would say 921 = front of water pump pulley to end of Isuzu bell housing.

If I measure from the front of water pump pulley to fly wheel housing (where bell housing bolts up), it is 700mm. The fixed fan at the front is 60mm extra.

Landy bell housing is too hard to measure from engine bay and it's too cold to be lying on concrete tonight. ;) Plus surely the length of the Landy 4bd1 bell housing is around here somewhere....

Note I could be out by a few mm as well... It was a tape measure eye ball job. :)

---

Within a few mm is fine. Thanks.:)

Quote:

---

Originally Posted by Mick_Marsh

That may be the adapter plate. Want to have a close look at one, say, Thursday or Friday?

---

Hell yes, Friday would suit better but I can do Thursday if that suits you better.:)

Quote:

---

Originally Posted by bacicat

Hell yes, Friday would suit better but I can do Thursday if that suits you better.:)

---

Either for me.
It's got to be before the transport company close their gates though.

I'll just take a day off - simples...:)

Landy Isuzu LT95 bell housing length 295mm

Steve

Quote:

---

Originally Posted by bacicat

I'll just take a day off - simples...:)

---

Pop out to see the genset at Micks. You know, a site inspection.

I may be able to do something like that depending on how long you think we will be.

As long or short as you want.

Quote:

---

Originally Posted by steveG

Landy Isuzu LT95 bell housing length 295mm

Steve

---

Just measured the 101 LT95 bell housing which is 200mm. I'll lift the engine cover on the 101 tomorrow arvo and measure everything up.